Workshop disclaimer applies!
DISCONNECT THE BATTERY NEG - TERMINAL
STEERING WHEEL PAD
NOTICE:
If the airbag connector is disconnected with the ignition switch at ON or ACC faults will be recorded on the ECU
(1) Place the front wheels facing straight ahead.
(2) Using a TORX© socket wrench, loosen the 2 TORX© screws untill the groove along the screw circumfrence catches on the screw case.
(3) Pull out the wheel pad from the steering wheel and disconnect the airbag sensor
CAUTION: When storing the wheel pad, keep the upper surface of the pad facing upward.
never dis-assemble the wheel pad
NOTICE:
When removing the wheel pad, take care not to pull the airbag wire harnes.
Thanks to Mat Clawley for this guide!