Hello, people so today I was about to show you how to make FOG Conversion.
So we Start Now.
STUFF YOU NEED:
Dual bulb with socket, same as you have ones on your brake lights.
(You can get them from Scarp Yard they are cheap.)
Wire's about 2m of 2 wires.
Knife
And talent lol.
I will include pictures and ill try do my best to explain everything.
This is where we start, if you look closer the fog socket is different just by a bit, so make it fit we need to CUT THE TEETH I will call them.
Red squared: is what you need to cut not all tho Just to make it fit and pop it so it coudnt take off easy from the place.
If you can see what i Mean.
The main think dont mix the cables. If you could look closely when cuttin the wire that The number if little cooper wires that are inside of the WIRE itself, in one of them are 6 lines another is 9 lines which tells you who gives more Voltage. I have made up a Wiring diagram its very easy.
And youve done it, Have fun. Ask me if something goes wrong. Ill try to explain best as I can.
Next will be doin city light conversion.