jeffrosie

better MPG!!!!!!!!!!seen v8's with better MPG than the lex.

Think this should top the list as the poxy 1GFE has just below 160 brake.

Does anybody make one to fit the 1GFE in the IS200??

Jay, I got the same type pod and in the process of finishing it. Your work looks sooo damn good - thought it came like that made for the car. Thanks buddy, you have given me new inspiration.

Jay, where did you get your 3 gauge console from - I like :)

Forgot Armrests

HID's as std

LED rears as std

250 - 300 brake with a slightly higher rev limit - about 7500

4 pot front brakes, 2 pot rear brakes - discs are a good size

Front seats could be more bucket like - recaros style

Front heated windscreen

Auto close windows and Sunroof

Auto retract mirrors when alarm armed and viceversa

Rear Wiper

Slight burble on std exhaust system

Get the ones that stick to the outside of the window frame rather than the type that slides into the top of frame with the glass.

Thanks M8 :) already read that. Had FK452's at the back and want a change, not that they gave any trouble - good in the dry and wet. Got T1R's on my GT4 and love them. Also heard good stuff about the Marangoni Mythos, so was gonna give them a try.

They swap over with no filing needed - mine did :)

I think they are the same

http://cgi.ebay.co.uk/LEXUS-IS200-STAINLES...=item20adba5aa9

Has anybody got this system on their car.

How is thw build quality?

Is it loud or just right?

Anything else to say about it??

What about this one

http://cgi.ebay.co.uk/LEXUS-IS200-2-0-STAI...=item2557c0a077

Thanks M8, exactly what I was lookin for :)

Where can I get the bulb holders from Ormi??

Reset ECU.

Get the engine to normal running temp. Switch off and remove ECU fuse. Refit after 2/3 min. Take car out for a brisk drive through the gears to relearn new fuel and ignition curves.

This is what I used to do, and now I just use a code reader/eraser.

Elmo, please share the info you got on the fuel pump :)

Whats the part number of the bulbs in the front fogs??

Looks good and what are you useing to get the bright light over the headlights??

Has any done this concersion like on the Altessa. The lights should come on with normal lights and go bright with the brake lights or come on with the fog lights. a two wat action, if you know what I mean.

I've used B&Q Plastikote Bright Red. Then used proctected it with alloy wheel wax. Been on for 3 years now and calipers always washed when car is washed. Calipers still look new, like they been just painted.

Got the Lexus logos on them too.

Wheels are Ultralite Battle :)

MOT done today and passed with flying colours again.

Just 1 advsory - replace rear tyres as close to legal limit. So any advice on which tyres to get but not ruin the drive like hard loud tyres and tyres that give in the wet, also tyres with long/medium life. Am i asking too much

Love to get the Marangoni Mythos in 235/40/17 on a 8"rim

Found at last the part number for the Power Enterprise Injectors

TH550A - blue in colour and a direct fit with no spacers needed.

Just can't find any info on the uprated injectors. A few people here have them, but nobody has any part no's. Had emailed a couple of places and did not even get a reply.

I think its gonna be easier to fit a FPR, with uprated pump and return line with a hike in fuel pressure. And as an AEM will be fitted, the fueling will be well under control.

Easier than locating bigger injectors.

Maybe the std FPR in the tank can be modified to increase fuel pressure.

MR2 turbo uses the 3SGTE and that uses side feed injectors.

3SGE top feed are too short or could have used REV3 3SGE.

Hope some body here has the part#

I've got Ultralite Battle in 8X17 with Mitsi Evo offset what ever that is. Got 245/40 at the back and 225/40 in the front. The rear arches needed rolling - done by Archenemy :)

Part number please :)