GALLA_4

Is that what she tells you? ;) ← Leave your sister out of this Ahmet!!!!!

Less is more!

Narrowed my AMP search down to these two below. The infinity is cheaper but with higher RMS (111rms) and the RF amp is dearer with less RMS (100rms). However would the build quailty of the RF be better than the infinity one? Anyone have hands on experience with either of these models or brands? Infinity: REF-7540A - Amplifier 4/3/2 channel amplifier Power Output: 111 watts RMS x 4 channel at 4 ohms and ≤ 1% THD 278 watts RMS x 2 channel at 4 ohms, 14.4V supply and ≤ 1% THD Signal-to-Noise Ratio: 81dBA (reference 1 watt into 4 ohms) Dynamic Power: 164 watts at 2 ohms Effective Damping Factor: 6.315 at 4 ohms Frequency Response (-3dB): 10Hz to 100kHz (-3dB) Maximum Input Signal: 5.5V Maximum Sensitivity: 230mV Output Regulation: .088 dB at 4 ohms RRP £249.99 OR Rockford Fosgate: Punch P8004 Amplifier 100 W x 4 @ 4 Ohms RMS 200 W x 4 @ 2 Ohms RMS 400 W x 2 @ 4 Ohms Bridged RMS Crossover : LP 40-400Hz 12dB per Octave HP 40-400Hz 12dB per Octave Bass Control - 0 to 18 dB @ 45 Hz Wired Bass controller included Low level RCA Signal input. Voltage - 250mV - 6 volts 4 gauge Power Wire input Protection built-in Frequency response : 20 to 20k Hz +/- .5 dB S/N 100dB A-weighted Damping Factor >200 Slew Rate 30 Volts/ms IM Distortion <.08% Stereo/mix frequency response: 20 to 20k Hz +/- .5 dB Dimensions : 2.4 X 11 X 17.7 (inches) POWERING THESE: FRONT 6½" (160mm) 2-way component system. CMMD. PlusOne. Passive crossover. 90w RMS 270w max power REAR 6 x 9 - 3 way speaker Peak power: 330 W RMS power:110W Voice coil: 4Ω Sensitivity: 90dB Frequency response: 35Hz - 22kHz Mounting Depth: 81mm Cut-Out Diameter: 150mm x 221mm

I believe a new key will set you back GBP£150 notes! Thata according to Chris.S who works for Lexus Hanley! Its NOT advisable to run the Lex on one key because if you do *** forbid lose that key you have there, your gonna have to get new keys all round plus change the immobiliser and other bits! Very costly experience indeed! Get yourself a new Master key! The key u have there is the spare!! GALLA_4

I bought them from ASP and have them on my IS200. Very very very pleased with them indeed!

Has anyone here removed the speaker grills from their front doors? The reason I ask is that they look like they are molded in as part of the rest of the door? I have bought new components and want to show them off. I dont want to cover them with the OEM door grills. Would it be a case of taking a very sharp utility knife to them and cutting them off?

Can someone help then! I am getting tired of looking through so many AMPs!! There is so many of them out there! What Amp do I need to successfully power these Infinity speakers giving 100Wrms to each speaker and allowing for the 4Ω impedence of the speakers themselves??? Am I didn't buy from the USA! So thats not an issue!

Well those dates aren't defo so.... I'll keep ya posted! If we could get a few more bodies could make a weeken outta it!

Was planning using the Amp @ 4 x 100Wrms @2Ω Should that be OK??

Aiming for around the 17th/18th! You could fly over aswell for a night on the batter! Ryanair prices slashed!!!

Yep Aido Trying not to soil myself to much!! "The Don" is Flying over to help!!! Gonna bring him out on the batter over here afterwards and get him in a bar brawls! Real Irish HOSPITALity

I am thinking of holding out for thr Prolex-Uk induction Kit! Mr Ellen assures me that the Apexi filter he will be using with his kit will filter more than the HKS one on offer from TDi. My Supercharger should be here very very sooooooon!!!!!!!!!!!!!!

Also going to go mad with the Dynamat: Doors, Rear Shelf, Floor, Boot. Might actually lessen road noise a tiny bit also. Using Streetwires installation kit also.

Guys what would you think of this setup below?. I already have the the headunit and this was making paste of the OEM speakers so hence the upgrade. HEADUNIT Max. output power (watts) MOSFET 4 x 60 Watt DIN output power (DIN45324, +B=14.4 V) 4 x 36 Watt Max. preout voltage (V / Ohms) 6.5 V RCA Preout 3 (F + R + S/W) REAR 6 x 9 - 3 way speaker Peak power: 330 W RMS power:110W Voice coil: 4Ω Sensitivity: 90dB Frequency response: 35Hz - 22kHz Mounting Depth: 81mm Cut-Out Diameter: 150mm x 221mm FRONT 6½" (160mm) 2-way component system. CMMD. PlusOne. Passive crossover. 90w RMS 270w max power

They hard to remove without mangling so I can well believe there is a need for these little screws!!!

I associate Civic Type R's with knackers!! Keep the Lexus mate! I think you'd be regressing rather than progressing!!!

"Mr Muscle, loves the jobs you hate" Well why the hell isn't he in here at work sitting at my desk this Monday morning?????

Wow Cheers Mate! Never ceases to amaze me this LOC!!!

Ahh that was just OKish I can do way better in GT4 on the playstation :D Well it says on the box its the ultimate driving simulator and they wouldn't lie! Would they?

Guys and Gals Does anyone out there have a Genuine Lexus Key Cover, the bit with the Gold L logo? When I went to change the battery in the key I found that the tiny tiny screw had been worn away from possible previous attempt to change the battery! Tried everything but in the end Mr Black and Decker was the only man to do the job! In him doing his job though the fecker mangled the screw even more and cracked the top cover a little bit. I've seen lots of key shells on Ebay but I want a genuine key cover and the little screw also. The transponder and back section of the key, with the key blade attached, are perfect so just need the top and the screw. Anyone able to help? GALLA_4

I'm having mine fitted fairly soon! (next 2 to 3 weeks) all thanks to Mr JAE2005 experience and Mr Ellens (Prolex-uk) powers of persuation lol. I can let you know how things go when shes transplanted in!

Guys Is anyone in the club running a second battery in the boot for audio? I'm going through a whole audio upgrade and will be running a 4 Channel 1000W Amp and also a Mono Amp for a Sub. Can this be done? and if so do you need to upgrade your alernator? ie since its charging two batteries instead of one. OR Would an upgraded car battey be the solution? I am never really running the Audio when the Engine is off only when cruisin :D But I dont want to wear out the battery so thats why I was thinking of the second battery option. View/Thoughts/Comments most welcome GALLA_4

Gagged

They are ****** and I think I am going to get the RX300 horns in there instead guys! They were all rusty and it was just a last resort!!! Could someone help with sourcing RX300 horns???

Guys what would you think of this setup below This is my current headunit Max. output power (watts) MOSFET 4 x 60 Watt DIN output power (DIN45324, +B=14.4 V) 4 x 36 Watt Max. preout voltage (V / Ohms) 6.5 V RCA Preout 3 (F + R + S/W) AMP PRODUCT INFO Detail 4x100W RMS at 4 Ohms 4x250W MAX at 4 Ohms 2x400W MAX at 4 Ohms Bridged 4x150W RMS at 2 Ohms Electronic Crossover Network Bass Boost Circuit Bridgeable at 4 Ohms 2 Ohm Stereo Stable Tri-Mode Capable Gold Plated RCA Inputs Line Outs for 1 and 2 Channel Low Pass Filter Control High Pass Filter Control Remote Bass Level Control Power and Protection LED Indicators Red Lighting Illumination Side Leg Mounting THD: <0.04%. S/N Ratio: >90dB Input Sensitivity : 100mV ~4V Channel Separation : >65dB Freq. Response : 10Hz ~ 30KHz Patent Pending Soft Turn-on/Turn-off Dimensions : 8.6''(W) x 2.74''(H) x 11.4''(L) REAR FRONT