Fforfun

This is great, thanks so much. I think it's 68142c-53030 that has warped or shrunk, but I might as well refresh 68188-53030 whilst I've got the bar out. I found a video on YouTube which shows the bar bolts are easily accessible with the door card off.

I've noticed the rubber window moulding has come away slightly in one corner of the rear drivers side window and there is a small amount of surface corrosion forming on the black metal strip. Does anyone know the part numbers for these items and how easy they may be to replace? Cheers

Was it PeterP18 you were thinking of?

Sent you a message.

Still need the tips if anyone is selling. Thanks.

Thanks for responding, but I think I've got something lined up now.

That's an interesting idea, thanks. I only live about 45 mins from H&S, so I'll drop them a line and see what they reckon. It is a full system. I have driven a completely stock ISF and the intake noise was still a big enough draw without the drama from the exhaust. Might have something to do with being a previous owner of VTEC engines. Good to have options.

Thanks for the pointer on the spot welds. I've seen quite a few posts about missing tips and would be keen to avoid the same fate!

Hi all, This is probably going against the grain a little... I bought my ISF with an aftermarket exhaust installed (possibly an H&S, but without a ramp to inspect I can't be sure) and, although it sounds biblical when I'm in the mood to thrash it, motorway drone at 1.5k-2k and verging on ridiculous cold starts early in the morning are starting to grate (we have a shared driveway). Having looked at other options, I keep coming back to moving to a standard set up. There are a couple up on eBay at the moment but thought I'd ask here first. Has anyone got one in decent condition with tips for sale? Bonus points if in the Essex/Suffolk area. Cheers

That seems quite the bargain. Is it just me, or is that a lighter grey body colour than we got over here?

I've managed to get some on order from Japan (UK sellers wanted twice the price!) using the part references from Lexus Parts Direct. One more question: did you get an alignment done following installation? Seems some did and some didn't on the US forums.

Many thanks for the help.

That's great, thank you. They are the ones shared with the RCF, is that correct?

Hi all, Looking at refreshing the LCAs on my ISF as a part of a general refresh and wondered what is recommended in terms of parts. I know the US guys generally go with Figs or RR racing, but are there any other options I should be considering? Full arms or just the bushings? I'd be ideally looking at OEM or OEM+ in terms of hardness, as I'm not planning sticking the car on track and the country roads near me are fairly dire. Cheers

Fair play. Good luck with your search.