sebaw
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Tutorials
Lexus Owners Club
Gold Membership Discounts
Lexus Owners Club Video
News & Articles
Posts posted by sebaw
-
-
I recently saw new comments. Someone wrote that it is impossible to make changes to the TPMS module via OBDII (you will probably need to disconnect this Chinese module again). I haven't checked it.
But it's good to know. -
-
First necessary to remove the screw of finding in the support that supports the rear range and then remove from the top by pulling the black plastic cover just below the white part (and on which rest the back beach, then the top cover (white) Which protects the speaker easily declipses by pulling on it (no screws). Everything is clipped (except the first and single screw)
-
-
I read this thread a few years ago.
____________________________________
I installed this ( https://aliexpress.com/item/4001193377497.html ) module today. NX 200T 2015, German (Luxury-Mark Levinson) version.
It really works 🙂 I now have information about the tire pressure. Not only a low pressure warning.- 1
Parking assist. Dynamic gridlines not showing - Service Menu (Hidden) / Solution
in Lexus NX300h / NX200t / NX350h / NX450h+ Club
Posted
After disconnecting the Battery, parking assist dynamic gridlines not showing. Only information on the screen: "System Initialising" The system required a car steering to the left and right but it did not work. I tried many times.
Solution:
How to enable Service Menu (NX)?
Menu / Screen / Turn off the screen.
Then press on the radio: 5x track forward, 5x track back.
(RX buttons: <CH, TRACK>)
Steering wheel angle calibration:
Service menu / Function Check-Settings / Camera Settings / Steering Angle Setting / Steering Center Memorize and Max Steering Angle Memorize.