LenT

Andrea Bocelli…another excellent choice, Niaz! Here’s a selection of solos and duets that should do the trick. Mind you, I recall a time in Florence when every street busker would be having a shot at ‘Time to say goodbye’ with varying degrees of success! And that often proved an incentive to be somewhere else. https://youtu.be/aAly0LdU13I

Excellent choice - every car should be so equipped. And judging from the rest of the posts in this thread, they’ll be immediately providing vital evidence should you even be bold enough to go for a local drive!

I’m sure we all wish you and your wife a very happy and successful outcome for the future.

I’ve not heard it either, but I suspect it’s a recycling by a character in Only Fools and Horses of a very old gag about the proud road sweeper who’s had the same broom for the last 25 years! And its only had four new heads and three new handles… (Other variations are available!)

You’re thinking of Saudi Arabia. Dubai is in the United Arab Emirates where you can only lose your liberty! 😊 Mind you, since Sharia Law applies there, could you demand that the thief also gives you their car as compensation?

W. (W Motors is a Dubai-based manufacturer of what they describe as high performance luxury hypercars!)

I note that the brochure boasts of this vehicle’s ‘quietness’! Did you buy this new from a Lexus dealer? If so, did they not notice the ‘crooked fenders’ or the missing ‘noise cancelling tech’? If this is all as you say, then I would have thought you had a case for demanding that the Dealer rectify what would appear to be faults or you reject the car!

There are quite a few shots with it on a Mercedes. In one of them Tarbuck is actually holding the plate in position. So it looks like it was also a stick-on option for a photoshoot. As for his driving….well, his behaviour was disgraceful. I’m sure he had very good reasons for not waiting at the scene for Police to turn up with a Breathalyser! I don’t know if it was a first offence, but he seems to have got away relatively lightly - unlike the owners of the cars he hit. Perhaps his daughter, Lisa - who I thought had developed in to a fine and versatile actor - would now explain to him why he should hand over the keys to the Lexus to a more sober personality.

My car was professionally detailed with a ceramic finish and I am not aware of any warnings regarding rubber seals. The sensors emit a sonic signal and the ceramic film is not only very thin - too thin to affect the signal - but also in contact with the sensor so internal reflection won’t occur. And after all, many people actually paint over the sensors without affecting their performance. The problem is more likely due to water ingress around the sensor - especially when ice has formed and then melted. I have experienced this myself on our other (non-Lexus) car. In my case it was simply cured by wiping the sensors dry. If ignored I imagine that the sensor may suffer internal corrosion and that would affect its performance.

I used to run an advertising agency and my Partner would tell new business contacts that - according to research he claimed to have seen - it cost SEVEN times as much to recruit a new customer as retaining an existing one.

You don’t actually specify who ‘they’ might be, but I can imagine that a regular Dealer will suggest replacement rather than patching. You don’t mention if you’ve tried any exhaust specialists, but they must be your best bet. Alternatively, if you were up to it as a diy job, a Breakers Yard might come up with a suitable Lexus - although there weren’t that many of them! An Internet search of ‘car exhaust repairers in south Wales’ came up with quite a few - so some time ringing around might produce results. How successful a welded patch might be is going to depend on how much was due to external rusting or internal damage. My own experience of diy patching solutions suggests they’re probably a waste of time. But provided there’s still sound metal to attach to, I would have thought a good welder could do a more economical job than replacing the boxes. How long it’ll last must also depend on how much internal damage has been done. Good luck!

My KeyCare cover comes ‘free’ with my car insurance. But this AA page outlines the cover and replacement service it claims to offer. https://www.theaa.com/breakdown-cover/key-assist

My AA Membership includes a lost key recovery system. A tag provides the Finder with the AA’s details and the incentive of a £10 finder’s fee! Obviously it’s not restricted to car keys!

Oh, I don’t know? Let’s not be too hasty….🤔

Transported me back to the early days when I would double declutch - either because of a lack of decent synchromesh or just because I could! However, I do recall once driving an Uncle about, who ran an auto repair shop, who said “What are you doing that for?” ”For the engine braking.” I confidently replied. ”Well,” he said, “You want to remember that brake shoes are a lot cheaper to replace than clutch plates!”. Something I strenuously avoid these days for the reasons you state. And the finest argument for an auto I can think of. In fact, does Lexus even sell a manual any more?

My sentiments entirely, Ronnie. Although I’d driven plenty of autos, this was the first I’d actually owned. I’d always thought selecting my own gears was the epitome of proper driving. Did I get that wrong!! The Lexus autobox is so good that I quickly realised that letting it choose the appropriate gear was a much more sensible use of my time - and far more befitting of my advanced years. Not to mention kinder on my slightly arthritic left ankle. I did try the paddles a couple of times, but it did seem a lot of effort for little gain. I appreciated that they could provide engine braking down steep hills - but you don’t encounter many of them here in Northamptonshire!

There may indeed be some kind of connection. It seems that the original Meltis New Berry Fruits - made in Bedfordshire from 1908 - with their unique LIQUID centres, have long ceased production and been replaced by New Berry Fruit Jewels! These are an ersatz confection of SOFT centres made in Germany! Mind you, it may also be possible to blame Brexit.

Firstly, if you have run-flats you don’t need to use an injectable tyre repair kit. They are both temporary solutions designed to enable you to drive slowly for a limited distance to a place of safety or repair. As for the TPMS valves - well the solution is designed to harden on exposure to air and to be distributed over the interior of the tyre by motion as well as air movement. So inevitably it will lodge in the valve stem and fill the pressure sensor hole in the TPMS valve. Few - if any - tyre specialists will agree to repair a RF because they have no way of knowing how much damage has been caused internally to the tyre by running the wheel rim on it. Similarly, even if they try to clean the sensor and replace the entire valve stem, they cannot guarantee that the hardened injectable solution has not affected the TPMS valve’s performance. One brand of solution (Slime) claims to be safe for use with TPMS valves - the valve makers claim that none are! I’m sure Lexus has a definitive answer regarding its own supplied product, which you will find tucked away in the Manual. But I would suggest being resigned to replacing the TPMS valve if you have to use the injectable repair kit! As another thought - and I don’t know the car well enough to comment - but is it possible to stow a SpaceSaver tyre in the boot?

A word of caution, if I may Gray. There may be less charitable Lexus owners here who will resent you flaunting your obvious wealth. 🙁

I replaced my D4S bulbs with the Osram Xenon Nightbreakers (also from autobulbsdirect) and they have been a great success. The originals were, frankly, inadequate - and far inferior to those of my previous Honda Accord. For me the brighter main beam, although very welcome, was less useful than the better controlled dipped beam that gave a much better view of the pot-holed verges of our narrow country lanes.

An acceptable shopping trolley substitute many years ago, was to look for a handy Skoda. It was also said in those days they were equally likely to be found in local streams, rivers and canals. 😊 I am led to believe that this is no longer the case.

I’ve just revisited Gov.UK to brush up on the current Guidance for MOT Testers - as you do. It does state that tyres must be fitted in accordance with the manufacturer’s instructions. Clearly, fitting them the wrong way round is thus a no no! Surprisingly, perhaps, this is NOT a Fail but is classified as a Major fault advisory. In effect, it can be ignored by the owner! Quite how that makes sense is beyond my pay grade. 😊

How can that ever be considered a clever thing to do? What makes a tyre fitter think they know more about tread design than the people who designed the tread? Why do they think manufacturers go to all the trouble of moulding arrows and words such as ‘Outside’ on to the sidewalls? Do they think it’s just for decoration!? An incorrectly fitted directional tyre will have reduced wet road efficiency, increasing the risk of aquaplaning; reduced cornering ability; increased wear rate and will generate more road noise. Now whether all that will be dramatically apparent will obviously depend on such variables as road surface, weather conditions, driving style, speed, age of the tyre and so on. So it may well be the case that a driver never becomes aware of the negatives associated with incorrect tyre fitting. But if such a vehicle was involved in a serious accident that involved investigation by the Police Accident Investigation Unit in the UK, for example, and they discovered this error, it would undoubtedly be regarded as a contributing factor in attributing liability. Perhaps this animation by Continental Tyres may help explain the principle of tyre fitting to your supplier?

No confusion, Paul. The valve is the sensor. But as it states, this is an unbranded TPMS valve that “Requires diagnostic tool calibration.” - which I suspect is a tool you don’t have. In which case you would need to take them to a good tyre retailer and see if they will fit and register valves supplied by you when the tyres are fitted and the wheels on the car. I don’t know if they will on the basis that if they’re not Lexus branded - or supplied by them - they cannot be responsible for their operation! In which case you will have bought a set of valves that no-one is prepared to fit and accept responsibility for. So I suggest it’s better to have that discussion before buying anything off eBay. But others may have different opinions!

Unlikely. Aftermarket sensors will almost certainly have to be programmed to the car and that requires specialist equipment. Are you also planning to fit the TPMS valves? And then presumably you will take the wheels to a tyre shop to have the tyres fitted. I suggest you will save yourself a lot of time and trouble by, first, locating a good tyre shop and choosing the tyres. Then ask them about fitting and registering OEM valves - you should be able to negotiate a good all-in price. It also makes them responsible for any problems!