Tomtit

Russ. I am now running 2 Lexus cars with 4.3 engines. Thankfully I don't do a big mileage. The SC is 21 years old, the LS is 20. At that age there will always be jobs to do. If I had to pay someone to do maintenance and repairs I would only have one car.

Anthony. I intend to keep the car for some time. I see replacing the driveshafts as an investment for the future. I don't mind crawling about under the cars now, but I don't know how fit I will be in years to come. It would be frustrating to have to get someone to do the work. Richard.

Russ. They are under SC430 - Drivetrain - CV Axle. Total cost including shipping is £289.

I assume the filings are from the worn reluctor rings.

I had previously found iron filings on the tops of both rear ABS sensors. Today I took the sensors out and found more filings on the tips of the sensors. I picked them off, then cleaned the tips with contact cleaner spray. I used a round magnetic tool inside the sensor holes to clear the remaining debris. The reluctor ring castellations are less than 1 mm deep, so I don't think they will be sending much of a signal to the sensors. I put everything back together and a test drive showed the problem still there. I did not want the hassle of fitting new reluctor rings, so I ordered 2 new driveshafts from Rockauto. They come with new rings and dust covers, and I will also get the benefit of new rubber boots and bearings. They are due to arrive next month. I will post the outcome in due course.

Anthony. Thank you for the reply. The videos were honest and persuaded me to buy the car. The dealer spent a lot of money having various issues sorted, and I have come away with a very good car. I used to have a BMW Z4 and my first job was to get rid of the runflats. It transformed the ride and made it much more civilised. Your car looks pristine. The alloys are better than mine. I might change mine in the future, but in the meantime I need to have the alloys on the LS430 tidied up. The paint is flaking off. I am in Longridge and the Forest of Bowland is on the doorstep. I am looking forward to some roof-down driving on the country lanes. Regards. Richard.

I have just bought a 51 plate SC430. It is the one featured on the Youtube video by High Peak Motors. I have fitted a used DVD player and the sat nav is now working. There is a buzzing when braking at low speeds; it is as though the ABS is about to kick in. I think the iron filings on the rear wheel speed sensors are pointing me in the right direction. When the workshop manual arrives from the U.S.A. I will do some dismantling and hopefully find the cause. I will report back on this issue as it may help others. (I have no criticism of the dealer on these 2 points. He has already spent a lot of money rectifying other problems). The car is a nice drive, especially with the roof down in the recent hot weather. The armchair seats are really comfortable and the cabin is well kitted out. I think it would be even better with conventional tyres. The runflats have about 5mm of tread on them so I won't be changing them just now.

One of my rear struts failed last year (which it is entitled to do after 19 years !). It was going to cost over £1000 to replace. Assuming that the other 3 would not last much longer, and bearing in mind the cost of other parts which could fail - compressor, height sensors - I could soon have spent much more than the value of the car. If the car was written off after an accident I would not get that money back. I converted mine to coil springs and shock absorbers. Total cost about £1000. I fitted them myself. I don't do a big mileage so this setup will probably last the life of the car. The ride is not as smooth as air suspension but it is perfectly acceptable.

I bought a rear parking sensor kit from ebay a couple of years ago. It has worked fine.

In the last 12 months I have had two sets of windscreen wiper blades on the car. The first were Bosch conventional and the others were the aero style. Both sets were noisy and tended to judder across the windscreen, even after using glass cleaner on the screen. I have just fitted a set of genuine Toyota wipers and the difference is remarkable. They glide across the screen in complete silence. They cost £39.01 including p & p from Lexus Parts Direct. As far as I am concerned it is money well spent.

Lexussparesdirect 07590 072646. I can recommend this seller.

That is a good idea. It is certainly worth a try.

The rear height control valve has 6 O-rings, 2 for each pipe. They should not be expensive.

I wonder if the rear height control valve is faulty and is allowing air to return from the strut to the front height control valve or to the compressor. Perhaps one of the O-rings has failed. It might be worth replacing the O-rings in the rear height control valve. I have not done this job. It is just a suggestion.

A leak between the height control valve and the strut seems logical as only one side is going down. When I had air suspension only one corner would drop overnight. My diagnostic kit showed no fault codes. I don't know if the pressure sensor on top of the air strut could cause the problem. You could check by swapping the 2 pressure sensors over, starting the engine and letting the suspension rise before switching off. If the other side of the car drops overnight you have found the cause of the problem. I have never dismantled the control valve so I don't know what is inside it. I am guessing that the valve for the rear left could be sticking partially open, or one of the O-rings may be allowing air to leak past very slowly. They are not silly questions; they are based on logic.

The fact that the strut rises quickly in the morning suggests that the air compressor is O.K. That is good news. It sounds like air is leaking out from somewhere. I would have a close look at the pipes and connections. Was the new height control sensor fitted in exactly the same position on the bracket as the old one?

You need to switch the engine on and put the suspension on the high setting, then switch the engine off. This should put air into the strut and raise that corner. Listen for the sound of air escaping. This may help to identify the leak. I no longer have air suspension so I cannot remember how high the car will sit. It may be high enough for you to crawl under. If not, the car should be raised on ramps or axle stands for safety. You need to check for a leak where the plastic air pipe goes into the strut. Another possibility is a leak at the rear height control valve. This is a junction of 3 pipes under the rear of the car, behind the differential and crossmember.

You may have an air leak from one of the pipes leading to the strut. Spray soapy water on the connections and check for bubbles. Is the replacement strut a new one? If it is used it may be faulty. The same question applies to the level sensor.

It was a challenge. The car will not fit in the garage, so I was grateful for the spell of dry weather. I was surprised at the weight of the air struts. I thought they would be heavier. They were easy to lift out. The most time-consuming part was compressing the coil springs far enough. My existing compressors were not long enough. I bought a pair of Sealey AK3846 long reach compressors. (£23.95 on Amazon). They were not a perfect fit, and at times only 3 of the 4 claws were hooked over the spring. I used my existing compressors as a back up in case the Sealey slipped. The front springs had to be compressed to 29 cms before they would fit. I can't remember the length of the rears. On the test drive afterwards there were 2 slight problems. There was a knock from the front nearside on uneven ground. I re-checked the torque settings and they were all correct. I then noticed a bit of play between the mount support washer and the shock absorber nut. I ignored the official torque setting and tightened the nut to eliminate the free play. Problem solved. The second problem was a slight judder through the brake pedal for the final few yards. Techstream showed no fault codes. I took out both rear wheel speed sensors and cleaned the ends with PCB cleaner. I checked the reluctor rings for corrosion or damage and they were OK. I cleaned the white corrosion from the holes where the sensors fit. The sensors went in more easily. The original problem must have been a sensor not positioned correctly as the problem has not recurred. To help others, I wanted to cover these points on my previous post but after a lot of typing I was afraid that I might be timed out and lose all the typing. If anyone contemplating this job has any questions i will be happy to share my experience.

This is a lengthy post but it will hopefully help others who want to convert from air suspension to coil springs and shock absorbers. The part nos. have been taken from lexus-europe.epc-data.com and are for a 2002 model. FRONT SUSPENSION 90950-01310 x2 rubber cover. Do not order as it will not fit the support washer on the KYB SM5566 mount. 48680-22050 x2 support washer. Do not order them as they are supplied with KYB SM5566 mount. 90178-10014 x6 nut for support. Supplied with KYB SM5566 mount. 48680-50110 x2 support assembly. Ordered KYB SM5566 from Amazon U.S. 48257-22070 x2 bump stop. Comes with KYB SB104 ordered from Amazon U.S. Rubber boot x2 ordered from ebay as not supplied with mount. 48131-50130 x2 coil spring. KYB RG6461 ordered from ebay. 90177-12002 x2 nut for shock absorber is supplied with the shock absorber. 48510-59366 x2 shock absorber. KYB 341392 ordered from ebay U.S. 90105-14153 x2 shock absorber bolt. Ordered from Amayama. REAR SUSPENSION 48553-50100 x2 cap. Ordered from Amayama. 94130-61000 x6 nut. Did not order. Used existing nuts. 48755-50110 x2 washer. Do not order. Supplied with mount KYB SM5565. 90179-10088 x6 nut. Do not order. Supplied with mount KYB SM5565. 48755-50100 x2 support. KYB SM5565 ordered from Amazon U.S. 48341-50070 x2 bump stop.Comes with KYB SB104 ordered from Amazon U.S. 48257-50020 x2 rubber boot. Supplied with support KYB SM5565. 48258-50020 x2 rubber seal. Ordered from Amayama. 48231-50170 x2 coil spring. Ordered KYB RG3072 from ebay. 90177-12002 x2 shock absorber nut. Supplied with KYB 341393 shock absorber. 48530-59416 x2 shock absorber. KYB 341393 ordered from Amazon U.S. 90177-14004 x2 shock absorber nut. Ordered from Amayama. Total cost of parts and carriage between £1000 and £1100. NOTES ON THE CONVERSION I have not given full instructions as these are available elsewhere. 1. To disconnect the air lines from the struts you will need to make a tool. I used a 1 1/2 inch piece of 8mm plastic tube with a slot cut on one side. 2. You cannot do this job without coil spring compressors. They have to be long enough; my existing compressors were not and I had to buy longer ones. 3. If you are doing the job without a helper (like me) you will need a long crowbar for levering components into place. 4. When fitting the shock absorber/strut assembly a trolley jack under the hub may help to line things up. 5. Rear seat removal is no great problem. Do not be put off by it. Despite what the workshop manual says there is no need to remove the high intensity brake light. There is no need to remove the rear parcel shelf. It only needs to be raised a few inches to access the mount nuts. 6. On the front suspension you will have to split the upper arm ball joint to get the shock absorber out and fit the new one. Be ready to catch the hub when it comes free and tie it up to avoid straining the brake hose. To access the shock absorber lower nut you can disconnect the anti roll bar drop link. 7. The offside lower front shock absorber nut was a challenge to undo. It needed a 3 foot breaker bar and a blowlamp to move it. I am glad that I ordered replacement bolts. When you have finished, have the wheel alignment checked and inform your insurers about the conversion. The end result:- The ride is slightly firmer than on air but perfectly acceptable. It is comforting that I will not have to spend many times the value of the car on air struts, height level sensors and air compressor, any of which could fail at this age.

You can't see much of the exterior when you are enjoying the drive. It is worth the fuel costs to have that super smooth V8 under the bonnet. Besides, you will not be spending on repairs as you would on a less reliable car.

There seems to be a shortage of parts in the U.K. I have ordered parts from ebay U.K., Amazon U.K., Amazon U.S. and Amayama in Japan. The KYB coil springs ordered through ebay U.K. arrived within a few days. The parts from Amazon U.S. arrived piecemeal within a fortnight. The parts from Amayama took about a fortnight. The 2 shock absorbers from Amazon U.K. gave an estimated arrival time of 2 weeks. After 3 weeks they still had not been despatched and they could not estimate a delivery date. I cancelled the order and ordered a pair from ebay. They are coming from California and have been despatched. I had to source 2 rubber boots/suspension insulators for the front strut mounts as they did not come with the KYB mounts. They arrived quickly from ebay U.K. The parts diagram for the rear coil springs showed an insulator which was not supplied with the springs. The insulator has its own part number but the Lexus dealer said it was not supplied separately and that I would have to buy 2 coil springs to get the insulators. I already have the springs so that was a non-starter. I have now ordered 2 insulators from Amayama. I ordered them during a national holiday in Japan so there will be another delay. Internet pictures suggest that the insulators are only pieces of rubber which fit onto the coils. I have seen them fitted on the second coil down so I assume that they are to prevent the coils rubbing together and creaking during compression. I probably could have obtained all the parts for the conversion from the main dealer, but at £450 a corner it would work out at double the part-exchange value of the car. I now have most of the parts and I should be able to start work soon. To help others I will make a list of all the parts needed, the prices and where I sourced them. I will also report back on how the job went and how comfortable the ride is.

That is a good point about the control arms. Mine have 140k on them so I will have a look. At this stage I don't know what the total cost will be as there may be import duties to pay. I will post the final cost in due course. I have learned a lot from the forum and I am happy to help others.

Phil. Thank you for the information. I will probably not go back to air suspension due to cost. I have just bought a fuel line disconnector kit which was recommended by a forum member. Using this I should be able to disconnect the air lines without damaging anything. I am patient and methodical and I don't like to cut or break things if it can be avoided. I have not removed the front wheelarch liners yet, so if access to the front air lines is tight there may be the tiniest amount of bad language!

Steve. Thank you for the information. I have read many posts on the U.S. forum. One member said that the Strutmasters kit left the LS430 sitting too high. Someone said that the kit would not fit and that Strutmasters wanted a 25% restocking fee. That together with the cost of sending it back to the U.S. could be expensive. I looked at the Suncore Industries coilover kit but someone said that it sags after a while. The kit from American Air Suspension looks good but they only ship to U.S. and Germany. After a lot of thought I decided to get KYB coil springs, dampers and ancillaries. I have ordered the parts piecemeal from four different sources including U.S. and Japan, and some parts may not arrive until September. For the benefit of other members I will report back when I have fitted them.