brunskill43

Thanks for the reply and like you said i have no codes or lights on so will do what you suggest and find the part.

No harness required just swop bulbs and go and just like factory fitted bulbs. Hope this helps.

Auxbeam are the best for led bulbs.replaced both my front fog and headlights and they are superb. They are usa based but youtube there products as i did.

Hello members Just some advise on my problem as being when i take off mainly 1st gear my car will kangaroo. It also do it in second and sometimes 3rd ( but if i release the clutch but keep my foot slightly on accelerator its as smooth as you like ). Many people blame my driving but i no my own car and it seems to be a possible injection output. Also on first start up when I move off the car seems like it has a fuel issue for a few seconds but only when its not been driven for a few hours. I have been blaming my clutch for being to springy but not sure anymore seem to be when i change gear and take my foot completely off the acceleration pedal and back on thats when its kangaroo,s. Any ideas anyone.

dismantled the battery even unplugged my ecu but just came on as i left it all scrambled

Thanks for replying guys and have now bought a replacement cluster for £16 on ebay. After some research i found that lexus clusters suffer from hot long temperature and the led,s can go bad and given the hot few weeks we are having i tend to agree. Replacement cluster was a last resort but for £16 am gonna do what texas suggested and try change just the display screen if possible if not its milage correction time. p.s my. display went. white in the end with blue lines down it but display information was still visible.

Hello guys just wondering if any of you have had the same issue as im having with my speed cluster display. The one im talking about is the top of the screen that is controlled by your steering wheel controller. My issue is of a morning its goes nuts like it has lost its pixels and only half of the words show up and some times upside down. This started just over a week ago and if i go to work and leave the ar for a few hours it is like it never happened and display works perfectly. Anyone had this problem and how was it fixed. My car is 55 plate is250 se

I removed my air filter housing and tested my headlight leveler and all looks good. I tested the loom connection going to my level motor and i got no reading from it with and without my ignition on. I found the fuse for the levelers and its works my rear number plate lights and my rear side lights and they all work fine so im puzzled Any ideas guys.

Thanks for the pictures and is for is250 as my headlights look like there fitted but only guessing as looking at the back of my light there is a square box like with a power supply and dont think its for my bulbs.will try and get pictres to verify.

Hello fellow members just want to ask if anybody has the same problem and what is the answer. This topic has probably been covered so a link would be very much appreciated. Both my levellers dont work and since i have only had the car a few weeks now and we have longer days i would like to fix the problem. My question is are the levellers at fault or is it a fuse or the level switch itself and what do i look for to fix them. No clips on YouTube to help so I'm relying on members with experience. My last question are the levellers fitted to the headlight itself as only asking due to watching is300 clip were its fitted behind the front wheel.

Not tried any thing just yet as wanted to get suggestions to my dash answer.If i can find a good answer will post my results Thanks for all the replies.

Sorry forgot about them but will sort today. Top of the dash looks like its been scratched by something and at some point tbe stereo has been taken out or replaced and it shows around the console just looks scruffy but i think out there some were there is a solution.

Thanks for your reply guys as just wanted to use projector bulbs as seem a better option but that just sounds like to much hassle to change. May consider hid kit but not sure yet.. Just done all my interior lights with led blue and look awesome in the dark my puddle lights are next.

Hello fellow members i just want to no if its possible to convert my standed bulb for projector bulbs with out getting new lights. The connection is different but what else needs to change to accommodate the projector bulb. pictures and info mmuch appreciated. my car is is250 manual 55 plate if this helps.