rich1068

Much appreciated. I'll get under the front of mine and compare.

Lovely stuff Zak. Nearly as nice as mine Now I've seen the pictures I'm pretty sure I remember the ad. If it is the one I saw I did drool over it once or twice. Where did you manage to source the mats from?

Sort of. Unfortunately the ones listed on LPD are for the MK4 with the revised bumper. And also unlikely to exist. But thanks for looking Qamar Bit of background, I've been chasing these parts since I got the LS last year. They're not available from Lexus, they're not available from Amayama, they're frequently damaged or already missing on eBay bumpers and as I've been told by numerous breakers, if they are complete they're one of the first parts to be snapped up. Blind luck or 3D printing are the only options open.

You do!

Use the sticky pads if you can. Rather than drilling holes. You can order them with the plates from the supplier I linked to or get them from Halfords.

Tried them But thanks.

Nope. I meant...

Very much appreciated. Don't really need measurements as the guy needs me to send my bits to him first but having a picture of how much is missing off mine would be a big help. I'm afraid you're going to have to get down on the floor! Just a thought but I'll keep you posted about how I go on too. He may be able to help with your missing intake and battery case.

Bueller...?

I've found someone who is willing to have a go at 3D printing the lower spoiler trim on the LS 400. Part numbers 76851-50050 and 76852-50030 respectively, unfortunately now unobtainium. If you're reading this you're probably aware that quite often the trim is broken or missing altogether. Mine have been cut down by a previous owner following damage on a kerb or some such and it catches my eye every time I look at the front of the car. What I'm after is an owner of a MK3 that still has the trim complete ( @MerchantOfVenice? ) and can take a couple of pictures for me. As low as possible showing the complete length of the piece. I've got to send what I've got to the printer but at this stage some decent photos would be very handy. Thanks in advance!

Nearly £8.5k in the end. Astonishing. And I agree about the damp. Look at the stitching on the steering wheel and the blooms on the A pillar trim.

A friend of mine recently picked this one up and he's rather taken with it.

Tried looking here? https://www.amayama.com/en

Any more on this? Places are opening up and I've already been to one or two shows recently. Would be great to get everyone together.

Honestly, if you want anything doing... Sorry Malc. It's a Merc.

Off to iPlayer with you Malc. We need a screenshot.

Same. I've wondered if there's some tricky way of getting the LS400 wiper arms to stand up on there own and meant to ask here but there really isn't is there?

Good.

When the rot set in across the the brand imo.

One or two suggestions I can think of...

Thanks. Looks well Spooky. Recently did the same. The Belkin one? Was quite temperamental for me as it kept activating the auto reverse and was quite noisy. So I dismantled it, took out the auto reverse mechanism and greased the back of the cogs. Works perfectly now.

Link?

I certainly wouldn't risk the motorway.

When my alternator failed they came out and swapped the battery over to one with a full charge and followed me the 10 miles to Lex-Tek.

Certainly wouldn't run without a tray. The risk of grounding or something flying up makes me shudder! How big/long is the crack? I think I'd be tempted to patch it. PITA the LS trays. So many fasteners and two different types