marcus

Like matt was saying there is going to be alot going on around this time, i for one would like to come to the next Euro meet but only if the timeing is right

can not make it sorry guys

I replaced the whole system on my Impreza, Magnex downpipe and resonated centre section with a Remus back box. Meant it had a nice sound, but did not wake the dead... as for performance gains, when dyno'd it had gone from 208bhp standard to 236.3bhp.. it also had a K&N 57i induction kit. Its funny how so many have grand opinions on here with no actual experience of products to back them up. I choose not to comment on things I have no experience of, its a pity others don't have the same courtesy. Instead we have the pleasure of statements like this one: This forum seems to be getting increasingly catty just lately. I work at a school, and even the kids aren't this bad! At least they have the excuse of being teenagers with scrambled hormones. ← If you look over the post's i was pointing out that most aftermarket exhausts give performance gains if and when you have the right setup, but from my understanding "Remus" back-box will not give any on its own ;)

← ;) what aftermarket exhausts give performance gains, all most all of them but not the Remus one

sounds good pete can not wait to see it mate :D Nice Body kit on that IS :winky: :D looks just like my one

Whats Boy racers got to do with it, ;)

PMSL

;) how much is to much, get it from the US if you can they are alot less over there. Thats where i got my T4 from $450 with shipping and i did not have to pay any TAX on it, as the place i got it from put it down as a test Item :winky:

I will "compress" you :) ← Are you a Kompressor?? ←

all i can say is roll on next year :winky: and there should be 3 or 4 LOC,ers who could be eating some Imp's & evo's by the next POD day comes round

here is my pimp name D. Magical bremner Ice

uh oh .......you have mentioned xmas meal there gonna start dropping out like flies now ← told ya so ;) ← i did say i would try and make it, and i all so said i was not 100% if i could make it......................you makeing me fill bad now if this job was out of the way, i would be comeing but the guy that was helping me do it has let me down :tsktsk: no Xmas Box for him, any way have a good one ok ;)

looks like i will not be joining you at MK meet sorry guys, i have this one job to do and its takeing longer than i would like ;) so i have to put in some over time have a good one guys, hope you all have a good Xmas as well :winky:

Thanks Dave, nice card m8 :D but where is me special gift Happy Xmas to you and your wife :)

see you can keep your B*W,s i will have Matts IS any day over a B*W :winky: Matt can not wait till next year at the POD.

for the price they want for it you could have a 10sec IS200, and then you could call it the M5 & M6 killer and it would not cost you that much to do it, OK! what would you have Matts IS or the new M5-M6, i know what one i would have :winky: (matts) come on 70K, and thats starting price. what could you do to your IS with 70K

101... 100%+ :D and yes it is addictive, ..........................see ya im of to Ebay

as long as you keep the serviceing upto date, and just get Lexus to take alook at the cambelt at the time of the service, But the cambelt should be good for 100,000 :winky: miles :D so lexus say, but at the end of the day it all comes down to you, you can replace it any time you like

This is why i got the Emanage Profec E-01 as this is my Boostcontroller :winky: i am geting a wastegate but just did not know what sizeto go with, i think i will go with 40mm one, as i have the Profec E-01 i can set it to open when i need it to. :winky: ← Custom Work by an experienced workshop is expensive but GOOD!! That's why I am my own workshop.... cheap but good..... :D .....hopefully good.... ← who said i was geting a Custom job, Well it is Custom Job, but im doing all the work and fitting :winky: the only thing that i will not be doing is setting it all up on Rolling Road, i will take it some where to have it setup as long as i get the sizeing of it all, there or there abouts, it should all run ok

This is why i got the Emanage Profec E-01 as this is my Boostcontroller :winky: i am geting a wastegate but just did not know what sizeto go with, i think i will go with 40mm one, as i have the Profec E-01 i can set it to open when i need it to. :winky:

Who said i was get a Walbro pump :winky: all i said i was geting a 255 pump I will let you know how i get on.

RR, what size wastgate you useing, for Matt, im geting a manifold made and the tube size is 1"1/2 so i was thinking of going with 35-40mm wastgate.

Yea thats what i have 255 Fuel pump just need to see if i can get Fuel Pressure regulater to ;) but all is looking good, but i still have to get Manifold made, and like matt was saying its best to try and keep it as cool as you can, so i would say get the Oil-cooler as well, if you can that is, you could add it latter on if you dont have the cash for right now.

I could be comeing now But im not 100%, i will let all know by next weekend the 18th, if i do come it will just be me the wife works nights so she can not make it but i will try and make it

Yeah but Gord - with your more "mature" age you have lots of knowledge that us young'uns don't have! :D - plus you don't have the pressure of a damn insurance company restricting what you do. Your only as old as you feel.! ← Im 18 then :winky: