marcus

Hi guys, did not get off to a good start today............i said to ahmet to meet me at Thurrock service at 6am...........well what can i say he got lost :P :winky: and as i was going to go with him i did not take the Add for Janspeed...............so i had to go all the way back home and get it so off i went......got what i needed and set off about 7.15am got to janspeed about 9.15am good to meet some new faces and its all ways nice to see the old ones :D bazza your car is going to very very fast when you have done playing with it mate :winky: and to the guys with the Supras.........very nice guys :D me want Had a good time today it was fun...........bit ***** as my car was still only running at about 80% 150bhp at the wheel...... 170 ft/lbs ;) think its time to get it maped and have some new bits put on....... But all in all was a very good day :D O yea big thanks to steve & Janspeed :winky:

which way you going, what time you leaving ??? and yes :D ← bazza i think we will be comeing around the M25 from J1 to J12 we could meet you on the way if you like ..............@ahmet why am i meeting you at McD's off the A13 if we are comeing back to Dartford Brdige....you do know i have to come over the Brdige to meet you .......why dont i just meet you this side

thats rubbish mate, the bmw V8 is ally,as are all BMW engines now-a-days most of the big GM and chevy engines are now Ally, and heavily tuned but heres a couple more.............. leading examples of auto aluminum applications worldwide Acura NSX - All- aluminum 3.2-liter V6 engine. Aston Martin Vanquish - May establish a new benchmark in ultra high performance luxury coupes. 450 hp 6 liter aluminum V12 engine add up to performance that very few can match. And, it has a top speed of 190 miles per hour. Cadillac Cien - The all-aluminum, dual overhead cam (DOHC) 4-valve V12 engine generates 750 horsepower and 450 lbs.-ft. of torque. Ferrari 360 Modena - Has an aluminum Engine, gearbox, Ford GT40 The 5.4 -liter V-8 engine is aluminum including, pistons, heads, GMC Envoy - Delivers driving performance with its all-new, all-aluminum inline six-cylinder engine. Honda Insight - aluminum alloy in-line three-cylinder engine. Jaguar - Poised to launch the XJ replacement, which will feature an aluminum Engine and is predicted to be about 441 pounds lighter than the current model. Jeep Liberty - The new Liberty has a 3.7 liter V-6 aluminum engine with aluminum cylinder heads Land Rover Discovery - The Discovery the engine block and cylinder heads are cast aluminum. Lotus Elise Sport 190 - Has a super-light aluminium engine Mercedes CL500 Coupe - The SOHC 24-valve V-8 engine is aluminum Mercedes S Class - The S Class features a die-cast aluminum engine block that's about 50 percent lighter than its iron predecessor, aluminum heads Mercury Marauder - The 2003 Marauder continues its racetrack heritage with The heart and soul of this muscle sedan is an all-aluminum 32-valve, 4.6-liter V8. Morgan Aero 8 - This Morgan Aero 8 is a new kind of Morgan, combining a cutting edge 4.4L V-8 that is stiff, light and strong. ← Just what i was thinking matt, well not thinking about all them you have there........!i was thinking along the lines off >>> all US guys makeing HOT RODS and they all have full aluminum engine , and them things put about 400/500 bhp :winky: now i have seen what the NEW IS looks like in them Pic,s i so want one 2/3 years think i will have to wait

wow that is very nice ............and the red just looks the part, with the blacked out windows

sounds good to me ahmet............ :D just let us know where you would like to meet and i will be there mate..... :winky:

like the rest have said ..............its no good just up upgradeing the fuel line and pump unless you are going to upgrad the injectors ;) what pump did they put in ? & what FPR did they use ?

Where abouts in London are you mate ? Probably best if we get a little London convoy going on ............ :D ← so where you want to meet :D

thank for that.........thats good to know :winky:

so what power are you hopeing to see when this is done

whats the point though you can get turbos to generate more than enough boost unless they are using the S/C to create a working pressure i suppose it would speed delivery then but it smells like overkill to me ← mate this is a work of art ;) :D S/C would be used for low RPM,s "ie" standing start, and then the Turbo would kick in at about 5000rpm so the S/C would get you up there very fast and from about 80/90mph the Turbo kick in ..........and when it kicks in you best hold on :D well that the way i would think its setup like

Steve..........it would be nice if we all new who was comeing, like puting the names on the 1st post to let all know :winky: Come on mate do an "UPDATE" of whats what :D

Good to see you are both ok Zee, :D

:D Nice one mike.............can not wait to see this when its all done :winky:

now i know why you could not get me i just looked at the number i give you............. was my old one i keep doing that ;)

;) did we go to the same place as when i got there at 10.30am it was ****** down...........i waited to see if it would stop but no still ****** down when i went at 11.45 ;) what time did you get there adie...........and what time did the raceing start well all in all i set off at 8.30am i think it was.............got to the M1 and it was ok.........get to the Pod at 10.30am and it was ****** down ;) sat in car for an hour or so..............then went then on the way back home sat on the M1 for 3 hours someone had died at J8 think a 16 wheeler had hit a car

im just about to set of i should be there about 9.30/10am adie give me a call if weather gets worse :winky: you have PM mate

WOW Zee you ok man............... I had a blow out last year doing, well lets just say i was going fast..........but i was running them run flats at the time they are good, im thinking of geting some more :winky: any way back to the Pod.................if you want mate still come and you can have a run in my IS if you like, and you can tell me what you think :winky: whats it like up there "ie" its not ****** down is it ;)

I will see you all there on sunday :D

i have had 3 tickets before and got off all them :winky:

Like all off us who have the IS.............i got the IS as i love the looks of the IS and thats why i got one, but i all so love the power of the Supar..........so why not just put the 2JZ-GTE in the IS that way you have the best off both .....Power and the Looks to go with it any way we are going way off TOPIC........... sorry adie so when are you haveing the rest off the work done mate :winky:

Yes mate. Those skylines are becoming too irresistable Especially as i cant get much more out of mine without spending LOADS more money again. Its all about the 1/4 mile nowadays See you tomorrow then mate and dont forget your liscence :winky: ← But you will be spending loads more when you get a skyline! why not go for a 2JZ-GTE in the IS and that way you have the Power and you all so get to keep the IS :winky:

Yes mate. Then i'll sell it See you tomorrow if not later today ;) ← you going to sell it when its done Im not going today now mate............but i will be there on sunday :winky: P.S i have seen a very nice Supar zr... for sale..............with about 500bhp £12,000

they are maxed out :winky: ← Yep. Not alot more to get out of the standard engine without doing internals and injectors etc ← The boost drop doesn't depend on the fuel feed. Check your wastegate! :) ← Thats going to be checked next week along with the actuator arm, when the fuel pressure regulator is fitted. ← you geting there then adie :winky: see at the Pod on sunday mate

Looking good mate...............let us know what you are running when you get them put in :winky: :winky:

why did you not wait untill next week as there is the LOC meet at janspeed and they have the dogs nuts off a setup down there :winky: when i had my IS on the rolling road, the power loss he put down was 25% ;) i should not have got it done at the place as the rolling road looked like it had seen better day "if you know what im saying" ;) and this is why im going to the LOC meet next week, as i want it done right by the right guys :winky: