agent_dess

That is brilliant! Thank You so much 😄 Gonna order the module now.. Seller offering it for £36 delivered on eBay

Funny how they never talk about the Ozone layer anymore (remember the rage in the 90s) it's since been replaced with Climate change!!! 😠

Do you have instructions on how you removed the C-pillar trim? it's over the same area as the hybrid vent. Any tips and tricks would be appreciated.

https://tiresize.com/calculator/

My bad.. your right its 40 front and 35 rear

Does anyone know what lexus detailing team use to clean interior when in for service? I loved the smell after picking car up.

Usual recommendations would be 225/35 front and 225/40 rear for 18" Cannot see issues with having 225/35 all rounds on 18". Manual states:

I had similar scenario on the po-40 aftermarket module I got on my is250 many years back.. I did everything as instructed but had to press lock twice for mirrors to fold. It quickly became annoying so I reached out to the sellers who arranged a Skype call with me and his supplier in Taiwan. Turns out there was a different wire (purple) required for UK cars.. so once I spliced to the and tried locking car BOOM.. 1 press lock and mirrors would fold and vice versa... I suspect you have same sort of issue, would suggest contacting the seller for advice.

I would be interested in knowing about this too.. seems bit rubbish the tpms don't actually tell you what each tyre pressure is.

Cleaned mines today.. at first glance it didn't seem bad, but then I pulled the filter and omg.. it was disgusting to say the least. The fan itself was ok untill I cleaned the blade then thick dust came of it. Took me about and hour to do, wasn't difficult at all.

So I took the trim off to see why it's not sitting flush.. even took the one from the opposite door off... After much inspection and comparison I concluded the trim has a slight waviness to it which is resulting in it not sitting flush toward door. Gonna order a new trim.

Part I'm after is actually is 93560-54025 just known as a screw.

YES!!! I think its 90541-09069 Rear Door Panel Cushion Thank you 😄

Hi, Can anyone identify what part this is? It doesn't seem to match any picture of trim cover retainers. I've got a broken one on the rear driver door.

I used rockauto a few years ago when I need to O2 sensors for the is250... LPD is great, but sometimes i think pricing is a little ambitious.

Yep door has been respayed back to original colour I still need to sort out the door trim, will look at it tomorrow to see why it's not aligned with front passenger door. Yep cruise control sorted too, I fitted it the other day. There is a post of it in the general forum, with quick guide and some photos of how I did it. https://www.lexusownersclub.co.uk/forum/topic/131795-cruise-control-stalk/

Hmmm that's interesting to know 👍

I have a shark-fin on mines and I'm confused as whether it should be there or not? I have to say it does look cool but i do not know if it is functional or not.

Normally i would have disconnect battery for example if i was going to remove the seats from the car then i would disconnect battery. For the steering i probably would have if i was going to do extensive work like remove steering control for wrapping etc but since i only need to access 2 screws i figured i would play roulette 😂 remember kids always disconnect the battery 😉

Cruise Control Stalk from Amayama shipped 26th Jan arrived yesterday 9th Feb. Fitted today took about 25mins as i did NOT disconnect 12v battery. So i took my time trying to figure out what i needed to do to get access to the cruise control. Tip: it helps to turn steering wheel 180 degrees then you can easily see the 3 spring mechanism 🙃 Remove the stalk control cover using trim removal tool. On Driver side there is just one spring mechanise that needs to be pushed. This time on passenger side again remove steering wheel cover using trim removal tool. There are 2 spring mechanism on the passenger side. Centre unit pops out, carefully lift to one side Broken cruise control unit has 2 screws and a connector. once swapped over simply push the centre unit back into place Tip: The downside of not disconnecting the 12v battery meant the i had the horn blaring while i pushing it back into place 😶 The old broken cruise control 😐

Cruise control came to £48... but i think generally vat is supposed to be applied at 20% and if item worth is more than £130 then import charges apply.. i maybe wrong.

Yup I was going to buy from there again 😁 The cruise control stalk was shipped 26th Jan arrived yesterday and no additional charges to pay, so defo buying from Amayama again. The link above was just for reference.

Meguires PlastX Ive used It on headlights in the past and more recently to get rid of the failed UV coating on my media screen for my car.

O/S Rear Scraper Moulding - £80.15 available from LPD here. N/S Rear Scraper Moulding - Also £80.15 available from LPD here.

I ended up using 3M Dual Lock.... very impressive strong stuff that does allow the plate to be removed for detailing etc.