Do Not Sell My Personal Information Jump to content


Bigste

Members
  • Posts

    42
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Posts posted by Bigste

  1. if fluid is ok or new, then make sure you've got equal air in the opposite tyres (i do 32 f, 34 rear for some reason???)

    If you have a slow puncture it can affect steering and make it heavy at times.

    All 4 tyres are usually differenty when you decide to check

    Mine is a 93 models remember! I'd expect he 04 wheels to be still ok

    Its worth a check if fluid is ok, depends how heavy the steering goes

    Sounds like the filter screen on the rack is blocked and when you clean it they can be problematic to bleed. Cheap job but time consuming. Plenty of posts about it on here.

  2. I looked for over 6 months and got 93 in apr 07 on eBay. It is as near mint as you'd expect for the year with under 100k so they are about. I'd be more inclined to not rule out a 93/94 and pay a bit over the odds. I paid £2500 so you should get one. History is very important, even if it's DIY. Keep looking you will find one. With petrol what it is they will soon appear. Actually there is a stack on eBay at the mo, personally I'd stay away from dealers and get one from an enthusiast.

  3. I am in Benidorm, Spain and my nearest dealer is Alicante. I get the same treatment. Nothing is too much for them. Also I have bought a few things there and never found anything to be over the top pricewise. Last thing I bought was an O ring at €1.79 (about £1.35) and with that came the coffee and biscuits and a phone call to tell me the part was in the following day. Lexus Alicante obviously value their customers. Well done Lexus!

  4. If you want to plug it here goes. The item you replace is difficult to get at, it's the bit that has 2 pipes running to it at the bottom of the pump. You replace it with at standard oil drain plug which is 14mm X 1.5 thread. Use PTFE tape on the plug. Having said that I think you should just doing the flush & bleed for now. I find it inconcievable that it's a bad pump. Trust me!

  5. Okay Neo get your drift. It is hard to believe that it might just be air. I find it harder to believe that a new pump is faulty. As for the ACV I think that dampens the steering at high revs. Most members agree that for what it does it can be dispensed with without any noticable effect. I've an idea on the solinoid but not too sure so I'll leave that for someone else. One thing for sure is that bleeding will cost you nowt and I am VERY confident it will cure it. Just one question. When you had new pump fitted was that with a new reservoir, usually the res is not included. If not you could be suffering from a blocked reservoir filter. This would cause the pump to malfunction until the pressure built up in the system (higher revs) thus forcing fluid through the blocked filter but lower revs would not give enough pressure to pass the blockage. Hope you get it sorted soon. If you want to remove the res you'll need a new O ring and I've posted plenty on here and other forums about the procedure. It's an easy job and a couple of hours is allowing time for a brew.

×
×
  • Create New...