IRLRs200

Welcome to the club. You do know there is a club in Aussie/NZ too? Anyway this sounds like what could be a slipping clutch. The last owner must have been riding the clutch a lot, since there was only 30K on the clock. most clutches last over 100K once treated right

And this is NOT me in the clip! Looks real to me! linky

My bad!!! Done

Check this post lads for an update on the rolling road

Ok so we have the final 10 cars for the rolling road day. We can still squeeze another 5 in so contact myself or Dizz asap if interested. So the plan we be to be down there for 9am bright and early on Saturday 3rd March. We will probably try all meet up beforehand. The plan is to meet in Halfords at Liffey Valley Retail Park(follow the orange brick road!): and depart here at no later than 8:30am If the weather is good can everyone make sure to give their cars a good cleaning, there should be a few photographers from manic-motorz.com and www.DizzPics.com around and we might even get a small feature in Modified Motors! Any problems or concern, Pm myself or Dizz. Looking forward to this event!

Hmm my car is the same too maybe i have one of these fitted too! We will find out at the rolling road i suppose!

Where do u run the pipe? And how do u attach it onto the gap in the bumper?? Any special ducting i should use are just whatever fits the hole? So many questions!

rich

Will a lightweight flywheel work with the standard clutch? De- catting will that not increase the emissions and make it fail NCT(MOT)?

Hey guys i have an apexi power intake induction kit and Aluminium box on my RS, just curious is there anyway i can feed more cold air into this? when i removed the old factory airbox it left a small circular hole in the inside the drivers side front panel. Is this hole sufficient or maybe add some piping to beside the front fog to get more cold air in? Cheers

Well ive added an apexi induction kit and last owner stuck a aftermarket cat back exhaust system so what other mechanical mods can be done that arent too expensive before i get the camcon?

Any one have an RSM fitted on here? if so does anyone know where i can get an extension loom for it?

http://www.auto-acoustics.co.uk/index.asp?...p;productid=276 not cheap though Crikey that price is outrageous, but if u got the money I suppose u'd pay it Got mine off ebay for 50 quid :D :D :D You could always learn how to use fibre glass and make ur own!

Not really my cup of tea. He can hold the car though, better than some people on here There is a LOC group on you tube, here You might wanna remove this too

Sorry lads i didnt realise this would upset so many people, Obviously i missed this point in the terms and conditions. But it was done and private grounds so dont think its illegal. Point taken anyway, ill refrain from future posts like this

:)

racket

heres a link to it

http://www.auto-acoustics.co.uk/index.asp?...p;productid=276 not cheap though

check on the TDi website or search the forum

Tein lowering speings are about 260 Euro from Urban Performance. I'll be getting a set next week

either you wired something wrong or else the acc and live are reversed. on the HU side of things the red and yellow cables should be the 2 main power ones. U should be able to disconnect these half way down the wire. Try connecting red to yellow and yellow to red. I had that problem where u press the power button and power would come on for a sec the go off. is this whats happening to you? If its not that try a different earth/grounding point for the HU. PM me if ur confused, some people are getting annoyed with ur noob posts(not me!)

It always worthwhile to check ur network card is compatible with Linux before you install it. The list of compatible network cards is constantly growing so it shouldnt be a problem for much longer

Ye 3rd March ill ask them do they notice anything dodge about it! Have the NCT(MOT) in March too so that might show up something maybe

Can i do that myself? What do i need to check for?