Leaderboard

Not wafted ........ cosseted ....... in fact it might not be a good idea, as I would loath to be responsible for you guys being dissatisfied with you ISF's!

Whilst browsing the web came across this ,I commented on another thread last week about the 1 ZUFE being used in other applications ,this is the most outlandish yet.

Does life get much better than this @Big Rat ....................

I know I shouldn't say this but if I were you I'd keep the 430...

I use this : http://www.ebay.co.uk/itm/Wurth-Gummi-Pflege-Stick-Rubber-Door-Seal-Restorer-75ml-/261978299882?hash=item3cff1f9dea:g:aJwAAOSwjVVVsOSf I also use it on the seals in my convertible roof....works a treat

Thank you for your help. I was under the impression (evidently mistaken) that I was in the right area. I will move to the correct section. I am happy to admit that I have little understanding of cars in general and Lexus in particular which means I often seek guidance and opinions from other vastly more knowledgeable members. I am now somewhat stricken in years and am often bemused by the level of complexity of modern vehicles. So different from my first car (1966 MGB Roadster.)Hopefully if I follow your advice I will be directing my questions to a more relevant audience.

Well a cam belt change still looks like a challenge to me.

He never mentioned anything to me, just disappeared with his diet coke and his silver Toyota Avensis.......................

This is the difference between the Valeo and the Denso, chalk and cheese. The Denso ones look nicely finished, just arrived.

What, no crowd round it taking photos................. and you are kidding nobody with that can of DIET COKE, we have seen you hoovering up cake at Kemble

F ready for the day.

If this Scottish trip happens, I'd like to be wafted to the pub every evening in an LS400 :)

Sounds like a future LOC meet to me... 😃

Thanks @Warrington guy good to know they are close to OEM which is what I'd hoped. 👍

Oh no to old to tired to grey, anyway the how do I put this......... the redoubtable Mrs Rat has a skin about as thick as Donald Trump 😂 🐁

I know many have seen the 3 above on a review in Wales in 2008 by Chris Harris and others, in fact it was posted on here recently But are you aware they took the same cars to a track, and here is the reasonably clear footage of it 🙂 Big Rat

.... I do .... twice a year (Christmas and birthdays) .... and oh yes ... I get the petrol ...but nothing that requires opening the boot.

No probs matey her number is 07974........ sorry the Guinness haze seems to have obscured the rest 😂 🐀

@Flytvr Davi mate do you think the wife would mind this young lady assisting you in your next rain soaked trip to Wales She comes prepared and with a slightly quicker 'F' 🙂

Does it make the sound when taking off first thing on a morning or all the time? If its just first thing on a morning, its completely normal and caused by a combination of rain and cold weather causing the brake discs to rust and therefore stick. They release with a little bang. It'll only stick completely if left over a long period of time so if you go on holiday, keep the parking brake off.

Here is what can be done with an 8 litre V10. Beautifully executed. And it had a tax disc. John

Post wherever you like mate, the mods will move it if it's an issue.

I never look in my cars specific lounge, I click on "latest posts" and look at the overall input of all members. This allows me to wind up a larger and better cross section of people as possible.

do mobility scooters need DVLA stuff then ? or are they all electric I guess Just wondered about an after-life for my old Mk3 Malc

Just got a quote from Tony Banks (Leeds) for a new custom rear exhaust £329 incl'g fitting + VAT. Which doesn't look too bad when compared to £160 for Lexus to patch up the leaky Y. If we patch a leak now then how long will it be before another rears it head? After a few searches it looks like several folks are running TB's exhausts, with positive feedback. Will see what my local mechanic thinks tomorrow after we've inspected the pipe work.

You might want to read this thread... http://www.lexusownersclub.co.uk/forum/topic/104826-parking-sensors-having-a-hissy-fit/#comment-934471

Just fit them, look nice, hope they work ok, no reason why they shouldn't. I'll order some more next week if they're up to scratch.

My IS is being coated with Gardex which results in a lifetime guarantee provided you care for your vehicle in the normal way. An additional coating if correctly applied is a no brainer particularly if it is part of the Deal & Velvet Black needs it to pass the Fluorescent Light Test ! Tel

Believe me Marcus, normally you cant shut him up

Mud flaps are quite unobtrusive..

I like Uniroyal Rainsport 3 tyres as they suit the GS very well. Very comfortable being fairly soft walled but still rated XL and grip well dry or wet. Next choice Goodyear Asymmetric 3. Much depends on the type of car. Ed

Yes you will be fine A3 is for extended service intervals This may help ACEA This is the European equivalent of API (US) and is more specific in what the performance of the oil actually is. A = Petrol, B = Diesel and C = Catalyst compatible or low SAPS (Sulphated Ash, Phosphorus and Sulphur). Unlike API the ACEA specs are split into performance/application catagories as follows: A1 Fuel economy petrol A2 Standard performance level (now obsolete) A3 High performance and/or extended drain A4 Reserved for future use in certain direct injection engines A5 Combines A1 fuel economy with A3 performance

Not the best oil but perfectly fine to use it. I wouldn't leave it in any longer than about 5k before your next oil change though.

It would be a wild guess for us to tell you where you have the leaking oil. I can advise to clean the engine of the oil residue , start it and look for the leak.

ETA - having them fitted for a week or so, they work really well. The eyelets for the securing 'pegs' are 18mm and too big however the backing material prevents any slippage whatsoever. Unsure if I'm missing anything that should sit on top of thes pegs? Sorry for upside down pics

Well, I can't say specifically for the IS200 engine, but in general, oil on spark plugs comes from spark plug gaskets, valve stem seals or piston rings. The gaskets could be a good place to start since they shouldn't be too expensive to replace. However, since the plugs need to be taken out to replace the gaskets, it would be a good time to do a compression/leak down test as well. So, what I would suggest is, find a garage that you are reasonably confident can do the job, buy the gaskets and some new plugs, and get them to do the tests to see where the leak is coming from. If the leak is not coming from the valve stems or piston rings (doing a compression test to check the rings), then you can get them to replace the gaskets and hope that solves the issue for you. At this juncture, there is no point speculating any further as to what it might be since it is impossible to tell without a proper check. Hopefully, a competent mechanic will be able to give you an answer quickly.

A serious consideration.........how many 20 litre gerry cans will fit in the back of an ISF? Or do we just draw straws for who tows the bowser.

I have a LS400 1997 and I have not found one manufacturer of mats that has a correct template. Your 1998 template Shirish looks perfect for my 1997 also, I'm looking for some replacements and may well go with this company.

Landed @ Aberystwyth

Look here for recommendations

Thank you, it didn't take very long. Go for it and let us know how you get on.

Cheers, I've used ECP hundreds of times and the code box is usually at the end of the transaction just before you pay.

Just been on ECP to order the Denso wipers, I can't seem to find where to put the discount code. So looked on Carparts4less, the wipers are cheaper and there's a discount "bemine". £17.29 for both wipers. Ordered for delivery. Job jobbed.

The Valeo ones I have are rubbish, they're just the skeleton, they even look ****.

Since having the GS450H nearly one year there has always been an irritating squeak from the area above the glove box by the windscreen. I have tried many ways to stop this with little success. Silicon spray, pushing felt strips down the screen gap ect. While cleaning the plastic panels under the bonnet today I was applying slight pressure to the panel that runs along the bottom of the screen " the panel that the wiper mechanism passes through." There was the same squeaking noise. Lifting the rubber lip seal that runs along the edge of the panel against the screen then lubricating it with silicon cured the squeak both outside, and inside the car. I now have a car that is squeak free. This may work for others with this common problem. John

Original Equipment Manufacturer https://en.m.wikipedia.org/wiki/Original_equipment_manufacturer

Most likely you'd need to go to a repair specialist to get a colour match. There is a sensitivity rotating dial thing on the wiper stalk which may help. Try putting sensitivity up and playing with it. Sounds odd that it doesnt wipe when the stalk is pushed up though

Just enjoy the car, drive it, clean it and in a year or so get it detailed and start again. There are far too many uncontrollables that will cause deterioration of the paint finish to get too hung up about it.

As far as im aware, there's no colour code for the red leather seats. Really it should be something that the dealer should have sorted out.

Took the GS450H in for it's MOT today. It passed without problems, and only one advisory for a rust bubble on the outer skin of the nearside rear silencer (no leak). So all is good for another years motoring. John.