Angel Light For Is200

[Fargo]

its the hairdryer trick really,, you gota persist, about 20 mins or so. its easier with two people, one to heat and one to pull..

[Scorpion]

No..No..No a std hairdryer take forever?(believe me)Use a heat gun,one of those paint stripper type,once the lights are out it wont take longer than 10mins to seperate them. :winky:

[Dunkie]

Use an oven did it on saturday with my spare lights and worked a treat! Just be careful with the heats and the time in the oven.

Just need to attach my rings and wire it up and reseal and I am done :D

You can get the kit as low as £40 but its an LED ring and not a fiber ring, looks just as good.

[meri_gadi]

i have had the fiber kit for about a year now.

no one here is willing to do it. troied my self with a hair dryer. couldnt get it off. oh well i will try with the hot air gun.

adi

[whitie]

Use an oven did it on saturday with my spare lights and worked a treat! Just be careful with the heats and the time in the oven.

Qas mark 4, baste until golden brown, turn and repeat

[marcus]

Use an oven did it on saturday with my spare lights and worked a treat! Just be careful with the heats and the time in the oven.

Qas mark 4, baste until golden brown, turn and repeat

PMSL

[SteveAudioX]

Any one with ideas how to make these brighter...

[LCA575]

Slightly off topic here ,but somr time ago I was trying to sort a budget version of these with Geoffers , using  E-L lighting (look up Coolight.com for more info on it_ and even using the brightest wire available , the results were still disappointing.....the E-L DDE's were only visible in very dark conditions , and would have been illegal for road use IMO.....

Ergo , it seems the Umnitza types are the way to go.

The euro based kit will be CCFL which is better than any previous kits.

Check out the same CCFL type kit installed on this BMW, you can see it in broad daylight from over 100 yards away.

Check out the same CCFL type kit installed on this BMW, you can see it in broad daylight from over 100 yards away.

Edited March 27, 2004 by ColinBarber

[SteveAudioX]

Would this be just a Bulb housing kit upgrade or complete rings and kit...

I did get my kit from the IS300 thread a while back, just want them to appear as bright, they do seem rather yellow at the mo.

[dlayen]

Would this be just a Bulb housing kit upgrade or complete rings and kit...

I did get my kit from the IS300 thread a while back, just want them to appear as bright, they do seem rather yellow at the mo.

what lamp does it us steve?

[LCA575]

Steve- Its going to be new rings and its not even Fiber Optics, its Cold Cathode Tubing which is a very bright Xenon looking blue.

I will have the UK compatible kits in hand next week but I need to leave the country for a few days and will be back April 9th.

[Maz]

This sound very interesting....... :) :) :) :) :)

[BESTY]

Use an oven did it on saturday with my spare lights and worked a treat! Just be careful with the heats and the time in the oven.

Qas mark 4, baste until golden brown, turn and repeat

and season

[Mr Singh]

Steve- Its going to be new rings and its not even Fiber Optics, its Cold Cathode Tubing which is a very bright Xenon looking blue.

I will have the UK compatible kits in hand next week but I need to leave the country for a few days and will be back April 9th.

Sounds good to me. We use alot of cold cathode lighting in our demo cars and installs...

look at these few!

http://www.bladeice.com/103_0325.jpg - even through limo tint!

http://www.bladeice.com/104_0401.jpg - daytime on black! (white)

http://www.bladeice.com/103_0360.jpg

http://www.bladeice.com/103_0383.jpg - white cathode 4mm tubes :)

I can see the cathode rings being huge success myself.

B)

[Wxman]

Here is a video of them installed on my car. They are the new CCFL. :)

http://www.umnitza.com/dde/video/promo/is3001.mpg

[Maz]

Very nice matey....

[LCA575]

Here are the pics of the new CCFL kit, finally!

[Scalle--]

Here are the pics of the new CCFK kit, finally!

OH! MY! ***!

That looks so bloody good! How much are they?

Btw it's a CCFL, not CCFK;)

Why can't I type G.O.D.? Where's the freedom of speech here, guys B)

[TheDon]

ok you have sold them to me :o

they are so so sexy, perhaps a group of us could by them, meet up and do a mass install???? that way with more hands and different experiences we can do a good job??

sound good?

[LCA575]

They kits are only going to cost about £120 GBP plus shipping depending on how many people are interested.

[TheDon]

well count me in, im interested.

[TheDon]

actualy is there any way they can make a angel eye style kit for the fog lamps, as i have been pulled over by the police 4 times now for having them on and there are only so many times i can blame the auto light function for doing it before they wise up!!

i think that it would be sweet to have them lit up but not bother people???

[LCA575]

actualy is there any way they can make a angel eye style kit for the fog lamps, as i have been pulled over by the police 4 times now for having them on and there are only so many times i can blame the auto light function for doing it before they wise up!!

i think that it would be sweet to have them lit up but not bother people???

They are OEM BMW equipment, why would the cops give you trouble about it?

Its a good alternative to Daytime Running Lights.

[LCA575]

Here is a side-by-side comparison of the Gen-V vs the Gen-VI Demon Eye Kit.

[SHAHZ]

Daammm they look good :heart: :heart: :heart: