Anyone Breaking An Ls400 ?

[Adam Evans]

Is anyone scrapping an LS400 I need a front passenger side suspension assembly? Basically hub wheel bearing and the arm it comes on, not too fussed about anything else.

I have replaced my discs on my car and the brake judder came back, when I took it all back apart again I saw that there is about 2mm "warped play" in the disc, it is as if it is eccentric eventhough it is brand new

Took discs off and swapped with drivers side and it was perfect when wheel was spun

My conclusion is that at some point my car has had a bump on the nsf and has a bent knuckle/hub so best to replace all.

(I have changed the wheel bearing about 6 months ago so I know it is not that as there is no play in the bearing)

Anyone got a front corner that they do not need anymore ?

Thanks in advance

[Bluesman]

Is anyone scrapping an LS400 I need a front passenger side suspension assembly? Basically hub wheel bearing and the arm it comes on, not too fussed about anything else.

I have replaced my discs on my car and the brake judder came back, when I took it all back apart again I saw that there is about 2mm "warped play" in the disc, it is as if it is eccentric eventhough it is brand new

Took discs off and swapped with drivers side and it was perfect when wheel was spun

My conclusion is that at some point my car has had a bump on the nsf and has a bent knuckle/hub so best to replace all.

(I have changed the wheel bearing about 6 months ago so I know it is not that as there is no play in the bearing)

Anyone got a front corner that they do not need anymore ?

Thanks in advance

Here you go. I bought the drivers door off it. Hes a really nice guy. Contact him through the link in eBay. Mike

http://www.ebay.co.uk/itm/LEXUS-LS400-2000-W-Nearside-rear-door-unmarked-and-fully-working-/251604434508?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a94cafe4c

[ambermarine]

On 8/3/2014 at 6:52 PM, Adam Evans said:

Is anyone scrapping an LS400 I need a front passenger side suspension assembly? Basically hub wheel bearing and the arm it comes on, not too fussed about anything else.

I have replaced my discs on my car and the brake judder came back, when I took it all back apart again I saw that there is about 2mm "warped play" in the disc, it is as if it is eccentric eventhough it is brand new

Took discs off and swapped with drivers side and it was perfect when wheel was spun

My conclusion is that at some point my car has had a bump on the nsf and has a bent knuckle/hub so best to replace all.

(I have changed the wheel bearing about 6 months ago so I know it is not that as there is no play in the bearing)

Anyone got a front corner that they do not need anymore ?

Thanks in advance

Looks like you have it ready for you254393856634 hub.html

[Malc]

remember you are replying to an original post now 6 years old 

Malc