Remove Windows Without Using A Brick

[wildrnes]

hi i want to remove my side windows

how do i do it ?

[DUNCAN]

hi i want to remove my side windows

how do i do it ?

:o WHY ???????

[wildrnes]

:winky:

why not

we have some carbon fibre ones

add about 600 bhp at the spark plug

[Fidgits]

(cough) tint (cough)

[DUNCAN]

:winky:

why not

we have some carbon fibre ones

add about 600 bhp at the spark plug

ooooh... 600 brake ye say.......

Where can I get a set of these carbon beauties???? :P

[wildrnes]

(cough) tint (cough)

The "No shint Sherlock" award this week goes to............. :D

[Scorpion]

Take off door card,lift back plastic covering door frame,fold back on itself(very sticky) then its just two(i think)10/12mm bolts that hold glass on runners.........voila lift out :D :D

[wildrnes]

Take off door card,lift back plastic covering door frame,fold back on itself(very sticky) then its just two(i think)10/12mm bolts that hold glass on runners.........voila lift out :D :D

What tools will I need apart from spanners?

[DUNCAN]

I hope you've tried tinting before young man.

I wouldn't start by practicing on your car. It can be a bit tricky ;) bubble, bubble, crease, crease.....

[Scorpion]

a cross head screwdriver, to take the screw out that is in the finger well.

disconnect the red door light then prise the door card off round the edges

:D :D

Oh and the plastic clip that surrounds the internal door lever.

hope this helps

[Steve ( West Mids )]

Anyone know hot to remove the quarterlights on the rear doors?

[DUNCAN]

Just go with the bick idea... It's much faster

[wildrnes]

I hope you've tried tinting before young man.

I wouldn't start by practicing on your car. It can be a bit tricky ;) bubble, bubble, crease, crease.....

I'll practice on Lyn's car first - got some silver I don't want :D

Could use sellotape too hmmmmmmmmmm

Any tips from the tintmeister?

[wildrnes]

Just go with the bick idea... It's much faster

Biro?

[DUNCAN]

Any tips from the tintmeister?

Yep, Don't do it.

Get a proffesional in.... it'll save you money in the long run.

Seriously Matt, you'll be tearing yer hair out, it's not that easy.

A Biro is good, but I think it may exceed the 75% legal limit. Wadda ye think ?

[Scorpion]

If your doing it yourself make sure you thouroughly clean the glass

with a used(almost worn out)scouring pad,the one with the sponge

on the other side

When applying film make sure the glass is always wet with soapy water

Have you got the plastic tool to squeeze the water out with?

Always start from the middle and push outwards.

Oh and you need a seriously sharp surgical knife(thats for your wrists)

coz if you dont do it properly its quicker to slash your wrists,and have red tints

[wildrnes]

so you think i shouldnt try to do it myself?

[JOHNNY-BOY]

NO

[Fidgits]

so you think i shouldnt try to do it myself?

I don't think you should...

[ukazn]

I reckon it's quite easy to do the sides, the windows are not that curved and they're not that big either. As long as the window is clean and there is no dust around you should be fine. I did my own tints and the guy from tint-r said I did a good job.

[burnsy234]

great site for help (tints) www.tintdude.com