Wheel Geomtry In Scotland

[TommyH]

Hi guys, managed to find a motor engineer in Scotland, who is going to set my geomtry to WIM's settings (many thanks again Tony) next week, the problem i have is i think the drivers ball joint is needing replaced, as their is a knocking noise coming from the front drivers wheel, the question is, would the settings be out if i waited to have the ball joint looked at ? or would it not affect the geomtry,

Many Thanks in advance,

Tommy

[rig-pig]

you will need to fix this 1st. most good garages will check for any ware/damage b4 trying to set geomtry.

if you get it set 1st once you get the ball joint fixed you will have to go for a set up again

[TommyH]

you will need to fix this 1st. most good garages will check for any ware/damage b4 trying to set geomtry.

if you get it set 1st once you get the ball joint fixed you will have to go for a set up again

Thanks for your advise mate, im not very mechanicly minded, i'll get the ball joint looked at tomorow, thanks again.

Tommy

[Tony-Bones]

I'm pleased you have found somewhere.... Mend the joint first and remember i am just a call away if they have problems during the calibration or they need the data converted to different increments.

[Paradroid]

Grrrr. I'm glad I read this. My car has quiet clicks/clunks from the front when I'm turning, which must mean the ball joints are getting ready for changing.

So I'll have to get them done before getting my geometry sorted. More expense!

[TommyH]

I'm pleased you have found somewhere.... Mend the joint first and remember i am just a call away if they have problems during the calibration or they need the data converted to different increments.

Many thanks Tony, you have and still are being very helpful. I will take you up on your offer if needed.

A very grateful novice, Tommy

[Tony-Bones]

I'm pleased you have found somewhere.... Mend the joint first and remember i am just a call away if they have problems during the calibration or they need the data converted to different increments.

Many thanks Tony, you have and still are being very helpful. I will take you up on your offer if needed.

A very grateful novice, Tommy

Team LOC, that's what a good forum's all about :)

[Tango]

I'm pleased you have found somewhere.... Mend the joint first and remember i am just a call away if they have problems during the calibration or they need the data converted to different increments.

Many thanks Tony, you have and still are being very helpful. I will take you up on your offer if needed.

A very grateful novice, Tommy

Team LOC, that's what a good forum's all about :)

...and WIM of course go home you have a pm....

[Tony-Bones]

I'm pleased you have found somewhere.... Mend the joint first and remember i am just a call away if they have problems during the calibration or they need the data converted to different increments.

Many thanks Tony, you have and still are being very helpful. I will take you up on your offer if needed.

A very grateful novice, Tommy

Team LOC, that's what a good forum's all about :)

...and WIM of course go home you have a pm....

So i have...... Sorry Dad