Parrot Car Kit 3200 Is250 Help

[R22flyer]

IS250 SE no sat nav

I am trying to fit a new Parrot 3200, I have removed the radio but the connectors on the back of the unit are different, I pre purchased the Toyota kit as parrot recommends for the model of car but they are different too. It looks like the radio feeds an amp some where, any ideas where that is ?. any help would be greatful.

Thanks

Martin

[Parthiban]

You might need this if the Parrot cable doesn't work right.........Autoleads 06-910B

And if the IS250 is anything like the IS200, you'll need to connect the mute lead up to the amp, not the headunit, and again, if it's laid out the same way, the amp should be behind the glovebox. I do remember someone saying the Mark Levinson amp is in the boot though, so I'd check both locations :)

[R22flyer]

You might need this if the Parrot cable doesn't work right.........Autoleads 06-910B

And if the IS250 is anything like the IS200, you'll need to connect the mute lead up to the amp, not the headunit, and again, if it's laid out the same way, the amp should be behind the glovebox. I do remember someone saying the Mark Levinson amp is in the boot though, so I'd check both locations :)

Got the lead already but the plugs are different

[Geoffers]

The Amp is in the boot. Bottom right hand side.

[Parthiban]

Got the lead already but the plugs are different

Do you mean the plugs on the headunit or the amp? The lead should connect to the amp. From these instructions it sounds like the amp is in the boot......Linky

*oops, too slow, as geoffers says above :)*