Almost Finished

[w481ggc]

ive just got my car back from mark and the boys at tdi , who have done a great job for me :D . forged pistons and rods , ported and gas-flowed head , hks fcon sz , camcon , racelogic , twin power dli , and lots of other bits , ive just got to run her in for a bit , then its back to tdi for some more goodies and into the dyno room . when its all done its gonner be one very quick is200 se s/c auto . B)

[GWilso]

Someones been saving hard :D

Nice one you must be chuffed

ive just got my car back from mark and the boys at tdi , who have done a great job for me :D . forged pistons and rods , ported and gas-flowed head , hks fcon sz , camcon , racelogic , twin power dli , and lots of other bits , ive just got to run her in for a bit , then its back to tdi for some more goodies and into the dyno room . when its all done its gonner be one very quick is200 se s/c auto . B)

[lee_iceman]

Sounds interesting, think most of that has been done before on an Auto with some surprising results.

Fingers crossed it goes as you want it too.

[w481ggc]

Someones been saving hard :D

Nice one you must be chuffed

ive just got my car back from mark and the boys at tdi , who have done a great job for me :D . forged pistons and rods , ported and gas-flowed head , hks fcon sz , camcon , racelogic , twin power dli , and lots of other bits , ive just got to run her in for a bit , then its back to tdi for some more goodies and into the dyno room . when its all done its gonner be one very quick is200 se s/c auto . B)

yep , well chuffed , now ive only got one arm and one leg

[w481ggc]

Sounds interesting, think most of that has been done before on an Auto with some surprising results.

Fingers crossed it goes as you want it too.

when she is back at tdi , she will have some special bits put in that will make her surprisingly quick like no other car .

[lee_iceman]

Sounds interesting, think most of that has been done before on an Auto with some surprising results.

Fingers crossed it goes as you want it too.

when she is back at tdi , she will have some special bits put in that will make her surprisingly quick like no other car .

Good luck, keep an eye on that fuel consumption

[w481ggc]

Sounds interesting, think most of that has been done before on an Auto with some surprising results.

Fingers crossed it goes as you want it too.

when she is back at tdi , she will have some special bits put in that will make her surprisingly quick like no other car .

Good luck, keep an eye on that fuel consumption

my last two cars were v12 jag and bmw 7 , so fuel consumtion is not a factor for me .

[DAZA_W]

any power results yet what you aiming for

[w481ggc]

any power results yet what you aiming for

hi , i dont have a clue as to what the power output will be , but it will surprise a few people and me i hope .

[lee_iceman]

Guess around 225-230

[w481ggc]

Guess around 225-230

the numbers should be impressive when the dyno work is done .

[lee_iceman]

Is it the TTE compressor you got or the Rotrex?

[w481ggc]

Is it the TTE compressor you got or the Rotrex?

its the TTE .

[MacRS200]

I will be interested in the dyno figures too, plots would be good :)

[Adie]

Congrats mate. Is this the stage 2 s/c upgrade or whatever it is? Will be interested to see what final figures you can produce from the set up :) Also post up what you've had done and still doing, be nice to see what you're up to :winky:

When's your car back at TDI? Mine is down there from a week on Sat, so might see you there :)

[w481ggc]

Congrats mate. Is this the stage 2 s/c upgrade or whatever it is? Will be interested to see what final figures you can produce from the set up :) Also post up what you've had done and still doing, be nice to see what you're up to :winky:

When's your car back at TDI? Mine is down there from a week on Sat, so might see you there :)

thanks mate , tte s/c kit , dba 4000xs front and rear dics , greenstuff pads , tokiko adjustable shocks , eibach springs , tte anti roll bar kit , camcon , hks fcon and harness , harness air temp , wide band pressure sensor , f-con navigator , hks superfire plugs , 500cc injectors , racelogic , oil cooler kit with t/stat , je forged pistons , water pump , micro polish crankshaft , bore/hone cylinder block , tdi forged con rods , transmission cooler , hks twin power dli , stage 2 pully kit , tdi katana exhaust manifold , inazuma voltage stabiliser and earth kit , gas-flowed and ported head , hot sticks , nitrous kit , custom exhaust system . :D

[Adie]

:o **** hell mate, you have been busy. What Nitrous shot are you using? Any idea on final power figures or roughly what you'd be happy with? I suppose yours is pretty much a one off anyway so it'll just be to see what the s/c can produce

What are hot sticks and how much was the twin power?

[w481ggc]

:o **** hell mate, you have been busy. What Nitrous shot are you using? Any idea on final power figures or roughly what you'd be happy with? I suppose yours is pretty much a one off anyway so it'll just be to see what the s/c can produce

What are hot sticks and how much was the twin power?

the nitrous wont be going on untill after she's been in the dyno room B) , and i will be happy with what ever figure is returned :D , the twin power was £295 plus vat .

[lee_iceman]

Any pictures yet of the mods?

[w481ggc]

Any pictures yet of the mods?

sorry lee , i dont do pic's . but you can see her when she is in the dyno room live web cam at TDI .

[Rsarin]

im genuinely interested in this project,it will be intersting to see if all that work is actually gonna make a difference,everything minus the nos shot that is

[chrisis200]

Let us know when it will be on the camera, I've not seen one on it yet :(

& I'm sure you'll love it when it's all done :)

[w481ggc]

Let us know when it will be on the camera, I've not seen one on it yet :(

& I'm sure you'll love it when it's all done :)

i will let all know when its in the dyno room , i cant wait to hear her screem her head off :D thanks .

[IRLRs200]

It wil be interesting to see the power this pushes out, Maybe you should have started off with an Rs200. , less work and more power on the final result!

[IRLRs200]

so when is the dyno, and could you stand so we can see you...........as i dont want to miss the the look on your face when you screem, when your car dont :winky:

Would be interesting to see this too. Mines goin on the RR soon too, so it will be interesting to see what on RS pushes out on Irish fuel :o