Another Project,

[Syd Lambton]

Now that i have fitted my towbar, i needed to sort out the towing electrics.

Because there is a lamp failure unit on the Side and Stop Lamps i decided to interface them with relays with highish coil resistance.

Decided to interface all functions to the towing Electric Socket with a separate 12v supply , and fuse each circuit independent of the car electrical circuits other than the relay coils.

When i ran the wiring from my touch screen to my laptop in the boot, i also ran two 80amp supplies at the same time for any new projects, made separate blade fuses in the fuse box under the bonnet.

So new project started: - Deigned PCB on my PC and printed a positive on my printer onto clear film, then made the printed circuit, the outcome can be seen, the unit has 7 core cable in an out, with a separate 12v supply to feed the towing socket interface.

Will keep you informed of any further Project on my LS.

http://i85.photobucket.com/albums/k74/syd-...0568_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0564_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0563_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0559_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0555_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0550_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0548_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0543_resize.jpg

Regard Syd

[Monster-Mat]

cool.....an electronics wizard