Need Some Help!

[marcus]

Hi guys i fitted my coilovers about 2 weeks ago, the front seem ok but the back seems to be all over the place ;)

Is what i would like to know the old setup i had, i used the top mounts that come with the IS. But the new Coilovers have Top mounts so i did not use the IS ones.......... ;)

so guys if you could help me by posting some pic's off the back end setup, that would help me alot :D

I will put some pic's up later so you can see what im on about be back in 5 mins ..........................

[MacRS200]

Had real problems setting mine up and did a Thread on what I did.

Don't know if this helps.

[marcus]

Had real problems setting mine up and did a Thread on what I did.

Don't know if this helps.

←

yea had a look at that mate :winky:

thanks any way , i just had a play with them and i think i know what was up, when i lowered the back all i did was undo the bottom nut....... :duh:

so i had a look and is what i did was the same as you mate i lowered the bottom nut + the 2 nuts that hold the spring .............if you know what im saying.......so now the back is as low as the front, and its not all over the place anymore :winky:

[MacRS200]

Yup know what you mean mate.

Not enough downward travel of the wheel which means it struggles to keep contact with the road.