Reg Plate

[gib]

Help Required!!!

Trying to replace the bulbs which light up the rear plate.

Took off the trim and despite looking at things from all angles, you simply cannot get into the bulbs as it is shielded by metal

The only way I can think of is by getting access via the lenses

Anyone??

Ta

[Chris.S]

not to difficult actually

1. Remove inner boot trim

2. undo the four nuts that hold the moulding on covering the lamps

3. Pull the lock barrel free (its held on with the moulding)

4. give the moulding a little tug either end (one small clip either side

5. no plate lamps just flip out once moulding has been removed

[Zee007]

Just don't loose the 4 nuts you unscrew at the back otherwise your bootlid will forever rattle!

[eXOBeX]

Just don't loose the 4 nuts you unscrew at the back otherwise your bootlid will forever rattle!

←

Voice of experience eh, Zee?