Do Not Sell My Personal Information Jump to content


  • Join The Club

    Join the Lexus Owners Club and be part of the Community. It's FREE!

     

Recommended Posts

Posted

can we get some general how low , how high measurements

can people measure from the centre of the wheel to the top of the wheel arch

and post what the distance is (mm please)

front and back

with wheel sizes :ie 16,17,18, or 19"

and tyre sizes

and offsets

and any problems :ie scrapeing, rubbing issues

standard height of SE and sport models will be needed as the base

hopefully we can put these together and produce a decent guide based on real facts

thanks in anticipation of lots of answers

Posted

Right 18inch lexus alloys 45/ET,7.5j, 225/40/18 tyres, front centre of wheel to top of wheel arch 340mm, rear centre of wheel to top of wheel arch 355mm, the car is 2003 sport standard springs.

Posted
Right 18inch lexus alloys 45/ET,7.5j, 225/40/18 tyres, front centre of wheel to top of wheel arch 340mm, rear centre of wheel to top of wheel arch 355mm, the car is 2003 sport standard springs.

so there is a 15mm difference between front and rear, on the standard set up :yawn:

Posted

front 288mm

rear 298mm

OE Lexus 17" wheels.

Slight rub on the front.


Posted
Right 18inch lexus alloys 45/ET,7.5j, 225/40/18 tyres, front centre of wheel to top of wheel arch 340mm, rear centre of wheel to top of wheel arch 355mm, the car is 2003 sport standard springs.

so there is a 15mm difference between front and rear, on the standard set up :yawn:

i had just filled it up :o (petrol) when i did it bazza :hehe: will do again when not full :D

Posted
Right 18inch lexus alloys 45/ET,7.5j, 225/40/18 tyres, front centre of wheel to top of wheel arch 340mm, rear centre of wheel to top of wheel arch 355mm, the car is 2003 sport standard springs.

so there is a 15mm difference between front and rear, on the standard set up :yawn:

i had just filled it up :o (petrol) when i did it bazza :hehe: will do again when not full :D

love your sig gord,your lex looks superb mate,sorry bazza off topic,i`ll get some measurements for ye asap.

Posted

Measurements: (i'll edit and do later)

18x8 ET40

225/40/18

Lowered on Tanabe Sustec springs

Front rubs when making hard turns

Posted

Baz....here's mine.

Coilovers Fitted

320mm Front

315mm Back

18" alloys

225 / 40 / 18 Tyres

No rubbing at all!

:)

Posted

cheers everyone

is it possible you can give width and offset

your time is appreciated

so where are the rest ??


Posted

I'm in a 2000X Sport

Half tank of fuel

Standard springs

355mm Front

355mm Back

17" standard alloys

215 / 45 / 17 Bridgestone Potenza's

No problems to report

Dunno about offsets etc.........i'm dumb when it comes to these things. If you let me know what they are on the standard 17's, i'll amend this post accordingly

Posted

Going of SteveL's figures, mines dropped about 60mm from std.

:o

Posted
Going of SteveL's figures, mines dropped about 60mm from std.

:o

getting some strange figures !!

need a few more standard figures for a bench mark

Posted

I'm in work at the moment, and I haveny got a tape meausre handy.

I can use horse measurements though, if that's any good. :mat:

Fronts are..

225/40/18 on 8.5J Rim on a 35 Offset

2 hands high

Rears are

235/40/18 on 8.5J Rim on a 35 Offset

2 Hands and a wee finger's width. :lol:

:iraqi-info-minister:

Posted
Going of SteveL's figures, mines dropped about 60mm from std.

:o

getting some strange figures !!

need a few more standard figures for a bench mark

indeed... otherwise some of the -30mm drops above are only 15-20mm!

This could be an interesting thread once everyone puts there figures up!

:)

Posted
Going of SteveL's figures, mines dropped about 60mm from std.

:o

getting some strange figures !!

need a few more standard figures for a bench mark

indeed... otherwise some of the -30mm drops above are only 15-20mm!

This could be an interesting thread once everyone puts there figures up!

:)

Oh dear, what have i started here :shutit:

As far as i am aware, the previous owner did nothing to the ride height. Is there an easy way to identify if they are standard springs? Remember i'm a car dumbo

Posted

lol. I think Bazza's right, few more stock measurements will reveal more..

Where all dumbos... thats why where on here so we can all learn more :lol:

Or get Broke :crybaby:

:lol:

Posted
Right 18inch lexus alloys 45/ET,7.5j, 225/40/18 tyres, front centre of wheel to top of wheel arch 340mm, rear centre of wheel to top of wheel arch 355mm, the car is 2003 sport standard springs.

This sounds wierd - My IS300 with -30mm Eibachs sits higher than Gord's IS200 on the standard springs

Any ideas :blink: why?

Posted

full tank :

335mm front

350mm rear

Eibach springs, Bilstein shocks

19x8 ET45 League LG099

225/35R19 Pzero Nero front

235/35R19 SP9000 rear

Soon to be lower on coilovers :)

Latest Deals

Lexus Official Store for genuine Lexus parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now





Lexus Owners Club Powered by Invision Community


eBay Disclosure: As the club is an eBay Partner, the club may earn commision if you make a purchase via the clubs eBay links.

DISCLAIMER: Lexusownersclub.co.uk is an independent Lexus forum for owners of Lexus vehicles. The club is not part of Lexus UK nor affiliated with or endorsed by Lexus UK in any way. The material contained in the forums is submitted by the general public and is NOT endorsed by Lexus Owners Club, ACI LTD, Lexus UK or Toyota Motor Corporation. The official Lexus website can be found at http://www.lexus.co.uk
×
  • Create New...