Roof/Window Seal

[Ullager]

I have a 2010 is250 Cabrio with 34k on the clock. I haven't driven it for a couple of weeks. Yesterday, I found that the Battery was flat so had to use the mechanical key to gain entry. I was certain no lights had been left on in the car - that has happened to me before when the boot was left slightly ajar which flattened the Battery.

I found that the driver's window, which normally closes the extra ½" once the door is closed, wasn't closing because the roof/window seal had become distorted, preventing the window fully closing. This had put a constant drain on the Battery (according to the RAC man).

Presumably, I will have to go to Lexus to get a new seal fitted. Anyone any idea what this is likely to cost?

[Beamish]

 

Hi John,

 

The weatherstrip on the roof panel over the driver's door would appear to be part No. 62363-53010 and will probably cost in the region of £50 based on an Ex-Japan price of $30.

Fitting should be straightforward.

Double check the part number with Lexus to confirm that this is the part required.

Hope this helps,

Dec.

[Ullager]

Hi Dec,

Many thanks for that, very helpful. I'll make enquiries with Lexus Exeter.

John.