New brake calliper but what is this for ???

[Johnlex]

I’ve got a new rear calliper but in the box was this ??? Please see picture and tell me where and what it does please. Thanks 

[Beamish]

 

It's the washer that fits on the brake hose where it connects to the caliper.

Dec.

[Johnlex]

56 minutes ago, Beamish said:

 

It's the washer that fits on the brake hose where it connects to the caliper.

Dec.

Thanks - I was also told to buy b 2 copper m10 crush washers too ?? 
but this is what i need. 😂 

@Beamish

[Johnlex]

Most parts here still waiting for a few more !! Let’s get them brakes done 

brakes for life 

[Johnlex]

Now it’s clear 

hahaha all makes sense now 

I have 2 copper washers m10 which only cost me 60pence from a nut and bolt hardware shop that does everything been going there the last 25 years of more 

[true blue]

Hi looking good to go .Not trying to be clever ,but if you have not done this job before ,you need to be aware the hand brake shoes need to be backed off from the drums before you can get the discs off, this is done by turning a star wheel adjuster which is accessed through the hole in the drum when the rubber grommet is removed and the drum turned so that the hole is positioned at the bottom ,its a bit fiddly you need a small flat blade screw driver and a bright light, catches some people out when the disc won't come off !!.Re adjustment is needed on completion

Cheers. Dave

[Johnlex]

[Johnlex]

[Johnlex]

[Johnlex]

[Johnlex]

Job done all Lexus oem parts 

[Johnlex]

[Texas]

13 hours ago, Johnlex said:

Now it’s clear 

hahaha all makes sense now 

I have 2 copper washers m10 which only cost me 60pence from a nut and bolt hardware shop that does everything been going there the last 25 years of more 

The solid Dot in front of the part description denotes it is a ‘Replace if Disturbed’ part ie one time use and should be renewed if removed.

[Johnlex]

19 hours ago, Johnlex said:

these clips i am missing one on the other side, the long one that goes from pin to pin and fits in the side. ive hunted high and low but you can only buy as one whole pad fitting kit not just the single retaining clip. any help please as need one urgently