lane change flash amount

[200h]

is there anyway of changing the amount of flashers the lane change

function is set at ,the default setting seems to be 3 flashes i'd like it to be

set at 7 flashes has anyone managed to do this.

[Paul Brooksbank]

I managed to do it after about four attempts, I misunderstood the positions on the wiper switch. Try this, and there's also a video on YouTube if you need to have a look.

 

Flasher Sequence.

 Ignition off, doors closed
2.) Hold the wiper switch in the full up position. (this is the wiper off position)
3.) While holding the wiper switch in the full up position, turn the IG on. (two presses of the start/stop switch)
4.) Hold wiper switch in the full up position for 5 seconds
5.) Move the wiper switch down one "click" or "notch", hold for 5 seconds
6.) Move the wiper switch back to the full up position, hold for 5 seconds
7.) Move the wiper switch down one "click" or "notch". hold for 5 seconds (same position as step 5)
8.) Move the wiper switch back to the rest position (neutral)
If this was done correctly, the right turn signal will flash once.
To adjust how many flashes you want, you change the intermittent wiper speed switch. P1 starts with the speed switch all the way at the bottom, P4 will be the top speed. This is found on the wiper stalk.

[200h]

thanks paul

i now remember doing this on a ct many years ago

[200h]

set to 7 flashes now

much better