Next base Dash cam hard wiring

[Chris JJ]

Has anyone hard wired a dash cam, I have bought the proper wiring kit and it has connectors to join into a blank fuse holder in the fuse board so it switches off with the ignition.

Not sure the best way to the fuse board or its location for accessories?

 

 

 

[KayCee]

Chris

Use the one under the passenger side if you have a piggy back fuse use the wiper fuse then feed it up pass side then over head lining to the left of the mirror pretty easy job

HTH

Robert

 

[Chris JJ]

5 minutes ago, KayCee said:

Chris

Use the one under the passenger side if you have a piggy back fuse use the wiper fuse then feed it up pass side then over head lining to the left of the mirror pretty easy job

HTH

Robert

 

Robert ,thank you I will try to do it tomorrow if dry weather.

 

[KayCee]

Chris

YW

also there is a 10mm screw just near the fuse box use that for the earth

[i-s]

 

[KayCee]

Chris

Just as a matter of intrest which fusedid you use as i noticed yours is a 250 and mine is a 450h

[Herbie]

2 hours ago, KayCee said:

Chris

Just as a matter of intrest which fusedid you use as i noticed yours is a 250 and mine is a 450h

Any fuse that comes alive when the ignition is on is fine. I wired mine to the cig lighter fuse if I remember correctly.