Paint for internal panels

[Damo87]

Hi, can anyone advise where I can get exactly the same paint as in the picture to respray both panels in IS300H? 

Thanks

[Jayw13702]

Hi, can anyone advise where I can get exactly the same paint as in the picture to respray both panels in IS300H? 
Thanks

I have tried and didn’t have much luck, so I ended up getting mine wrapped in gloss black, I’ll post some pics when I get in the car


Sent from my Iphone using Tapatalk

[olliesgrandad]

2 hours ago, Damo87 said:

Hi, can anyone advise where I can get exactly the same paint as in the picture to respray both panels in IS300H? 

Thanks

A local auto paint factor would probably be able to assist. 

I had an Audi in 'Kingfisher Blue'. The Audi dealer couldn't supply a touch up so I went to a local paint supplier who when checking the code found that in Germany it was Pelikan blue. This was why it wasn't listed at Audi UK🤔

[Damo87]

19 hours ago, Jayw13702 said:

I have tried and didn’t have much luck, so I ended up getting mine wrapped in gloss black, I’ll post some pics when I get in the car


Sent from my iPhone using Tapatalk

This would be interesting to see

[Jayw13702]

This would be interesting to see

Sent from my Iphone using Tapatalk

[mister_johnn]

On 6/23/2019 at 2:03 PM, Jayw13702 said:

 

Sent from my iPhone using Tapatalk

 

Did you use a heat gun? I have a few panels which I want to wrap them and not sure if I should get a heat gun. Didn't wrap anything in my life.

[Jayw13702]

Did you use a heat gun? I have a few panels which I want to wrap them and not sure if I should get a heat gun. Didn't wrap anything in my life.

No, I used a hair dryer as I found a hot air gun to be a little too savage.

I wonder if the quality/thickness of the wrap plays a part in it, mine was bought from a vinyl supplier but was the cheaper end of the market


Sent from my Iphone using Tapatalk

[200h]

here are 2 images of a dash panel i wrapped in my partners Auris,

just be patient and use some heat when its needed.