rx 300 - front & rear measurement for ride height

[andybaz]

Hi all, I have TOYOTA TECHSTREAM which works very well for diagnostics & live data, as can be seen here - the settings are miles apart, im looking for factory base settings if any one can help ? the 3 images are the settings in HIGH - NORMAL & LOW positions. If someone can supply base factory setting for NORMAL ride height, this will be greatly appreciated.

I understand measurements FRONT are taken from the wishbone bolt to floor & REAR: tiebar at floor pan to floor. Can anyone confirm on this and have any heights ?

Ps... im based on the NORTH WALES coast if anyone wants a plugin /read, as can be seen here - I scanned 19 ecu's on this and this is what came back :) so working through and clearing/reseting all to monitor :)

[Herbie]

Hi Andrew,

Just sent you a PM, hopefully it'll help regarding the ride height info.

[andybaz]

6 hours ago, Herbie said:

Hi Andrew,

Just sent you a PM, hopefully it'll help regarding the ride height info.

Hi Herbie,

Much appreciated, I found a link and download for a small fee £10.00 before finding this website and very gratefull for the above link ..... covers Airsuspension spec which I needed as I no longer have access to LEXUS/TOYOTA, I worked for them 13+years and left as a Diagnostic technician, been off spanners now for about 6yrs .... so if you find yourself in Prestatyn area for any reason ..... and a lights on ... I have Techstream  , long time since I lasted used the programme, just blowing dust off to correct some suspension issues as the garage wont track until corrected, I didn't even know it was out .... cheers herbie, thank you

[rex450]

On 12/1/2018 at 8:04 AM, andybaz said:

Hi Herbie,

Much appreciated, I found a link and download for a small fee £10.00 before finding this website and very gratefull for the above link ..... covers Airsuspension spec which I needed as I no longer have access to LEXUS/TOYOTA, I worked for them 13+years and left as a Diagnostic technician, been off spanners now for about 6yrs .... so if you find yourself in Prestatyn area for any reason ..... and a lights on ... I have Techstream  , long time since I lasted used the programme, just blowing dust off to correct some suspension issues as the garage wont track until corrected, I didn't even know it was out .... cheers herbie, thank you

Hi,

I am facing same difficulties with my 2010 suspension. Readings are way off but the car sits dead straight. How You solved this?

Cheers