headlamp levellers not working

[brunskill43]

Hello fellow members just want to ask if anybody has the same problem and what is the answer.

This topic has probably been covered so a link would be very much appreciated.

Both my levellers dont work and since i have only had the car a few weeks now and we have longer days i would like to fix the problem.

My question is are the levellers at fault or is it a fuse or the level switch itself and what do i look for to fix them.

No clips on YouTube to help so I'm relying on members with experience.

My last question are the levellers fitted to the headlight itself as only asking due to watching is300 clip were its fitted behind the front wheel.

 

 

Edited April 15, 2018 by brunskill43
mistake

[madasahatter]

14 minutes ago, brunskill43 said:

Hello fellow members just want to ask if anybody has the same problem and what is the answer.

This topic has probably been covered so a link would be very much appreciated.

Both my levellers dont work and since i have only had the car a few weeks now and we have longer days i would like to fix the problem.

My question is are the levellers at fault or is it a fuse or the level switch itself and what do i look for to fix them.

No clips on YouTube to help so I'm relying on members with experience.

My last question are the levellers fitted to the headlight itself as only asking due to watching is300 clip were its fitted behind the front wheel.

 

 

[madasahatter]

[brunskill43]

Thanks for the pictures and is for is250 as my headlights look like there fitted but only guessing as looking at the back of my light there is a square box like with a power supply and dont think its for my bulbs.will try and get pictres to verify.

 

[normski2]

Have a read through these posts. May give you some pointers.

You have 2 levelling sensors. Front and rear wheel area both on the passenger side.

 

[brunskill43]

I removed  my air filter housing and tested my headlight leveler and all looks good.

I tested the loom connection going to my level motor and i got no reading from it with and without my ignition on.

I found the fuse for the levelers and its works my rear number plate lights and my rear side lights and they all work fine so im puzzled 

Any ideas guys.