Finally! Making some progress.

Peter P18 · April 25, 2016

Thanks Steve.

Was a lot harder to get everything to fit properly than I had planned for. You wouldn't think it looking at the photos, but that's why I got Rob Mitchell to help me.

Guy is a genius at things like this. Couldn't do it without his help.

Peter P18 · April 30, 2016

Hi Guys,

Been a busy but productive day for the F.

Gauges are all wired up, just need to fit the sensors, and they're good to go.

Passenger seat is also finished and in the car.

Just need the bolt to fit my seatbelt on the drivers seat, and that can go in as well.

Good news is there are now no dash lights at all! No airbag, no PCS....

Hope you like them.

Stuno1 · May 1, 2016

They look fantastic! Is this car in danger of becoming a garage queen?

Peter P18 · May 1, 2016

3 hours ago, Stuno1 said:

They look fantastic! Is this car in danger of becoming a garage queen?

No chance!

Seats and gauges are fitted for a purpose. Hoping with the X pipe installed, I can start doing some trackdays.

You'd be surprised how much lighter the new seats are. At least half the weight I reckon.

Just need to get the magazine feature out the way. Then I'll be putting all this hard work to good use.

GibletPH · May 1, 2016

The new seats look awesome, the CF rear just completes the look and ties in with the skimmed stuff. Very nice indeed.

SiM22 · May 1, 2016

Gonna say, the seats look awesome. You are doing a hell of a lot of work and sharing which is something i think we are all grateful for. Keep up the good work!

DAW · May 2, 2016

I second that!!

Peter P18 · May 2, 2016

Cheers guys.

Had some issues with the drivers seat sadly.

The seat frame doesn't fit properly. Had two bolts in, but the other two were way out!

When I tried fitting just the frame, I can make three out of four work, but the last one isn't close.

I've emailed GSM who I bought everything from to see what they can do. Might be a one-off, or possibly the IS350 AWD, as opposed to the normal RWD version I need, guess we'll see!

Shame, as I was hoping to be done apart from the sensors for my gauges, but this has set me back big time!

Steviebee · May 2, 2016

Cool build thread Peter! Looked your seats up, v nice. Love the carbon backs, will go lovey with the new carbon trim in the car. Looking forward to seeing the results with the H&S cross pipe. I've got used to the H&S on the new blue car, but still quite embarrassing in certain situations. Also don't feel the car just quite as keen at the top end unlike my white car with the Borla system, which did run a cross pipe.

Keep up the good work :)

stevie

Peter P18 · May 6, 2016

So both seats are now in the car.

It's only temporary though. Turns out I need the IS250/350 manual bracket to solve the one out of alignment leg drama!

It's bolted down tight with three out of four bolts though, so should be fine till the new bracket arrives.

Excuse the poor quality photo. Was after midnight when I finished, and car was in the garage which doesn't have great lighting!

Will do some better photos soon though.

Grey One · May 6, 2016

5 hours ago, Peter P18 said:

So both seats are now in the car.

It's only temporary though. Turns out I need the IS250/350 manual bracket to solve the one out of alignment leg drama!

It's bolted down tight with three out of four bolts though, so should be fine till the new bracket arrives.

Excuse the poor quality photo. Was after midnight when I finished, and car was in the garage which doesn't have great lighting!

Will do some better photos soon though.

Looks great - annoying when these niggles happen, but sounds as though you have enough intel to know what to do so it can be rectified

Peter P18 · May 6, 2016

Thanks James.

It was only after I sent some photos and measurements to the manufacturer in the States, that they told me the manual version of their bracket would fit. Guess you live and learn though. Not like I had any sort of reference or guide to go off!