Arial Fuse?

[Bluesman]

Is there an aerial fuse and of so does anyone know where it is. MK LS400. Mike.

[Ruud]

As far as I know the aerial and radio are on the same fuse.

Radio no 2 fuse on the driver's side fuse box above the acc pedal

[MNP]

Hi,

When I finally gave up on my electric aerial, I put a manual one in but didn't want the motor running, so

I removed the 10 amp fuse labeled 'antena' from the under bonnet fuse compartment. This disabled the motor but

the radio still works. Hope this helps.....Mark.

[Bluesman]

Cheers boys, will get onto it tomorrow. Mike.

[steve2006]

What symptoms are you getting Mike?

[Bluesman]

What symptoms are you getting Mike?

The Aerial hasn't worked for some time, I noticed some time ago it wasn't shutting fully or coming out as it should so bought an OEM innards off EB and tried to pull the old innards out but seized solid so 2 min job went up to my village garage he couldn't get the new aerial to fit as its completely different to the original so now I am just looking for a complete replacement, something I should have done in the first place. Mike.

[Tulpen]

Mike,

The extension part of the aerial is the same as the one fitted in a 'same-year' Camry. When I had my 400, I took it through a carwash (twice) with the aerial extended. Inserting the Camry innards was pretty easy - and much cheaper than the OEM.

[Bluesman]

Cheers Brian, I think I might have found one from a MK4 breaker, if not I will investigate Toyota route. Mike.

[Redsteve]

Hello Guys,

I am trying to disable the electric aerial on my 2000 LS400.

I have looked for the fuse in the engine compartment fuse box marked "Antenna" but I don't seem to have one. There is a fuse marked "Radio" but if I pull that one the aerial is disabled but the radio doesn't work either.

I pulled the boot trim out where the aerial is mounted thinking I could just unplug the aerial from that end but all I can find are multi-plugs with far too many wires in them just to be controlling the aerial.

Can anyone point me in the right direction as to which wires I need to disconnect.

Many thanks.

Steve.